Hi Guys,
We have an international client with an office in JFK airport. We supply devices to them throughout Europe but this is the first for North America. Can anyone recommend a good Lexmark...
Type: Posts; User: Tommyc
Hi Guys,
We have an international client with an office in JFK airport. We supply devices to them throughout Europe but this is the first for North America. Can anyone recommend a good Lexmark...
Guys,
I've a customer that requires a one bin tray for their Ricoh MPC3504(417585 one bin tray BN3110).
Ricoh have said this item is now obsolete and don't have stock, is there another option...
Hi, did you ever resolve this issue.
Seems we have an identical issue at the moment...
Thanks
Tom
Hi,
Not entirely on topic but will MPC7501 toner work in the MPC7500 and vice versa?
Thanks
Tom
Hi Guys,
Thanks for your replies!
I set staple to default through bit switches thinking it may staple every print job through finisher.
Still didn't work. Customer needs to configure back end...
Hi Guys,
Thanks for the replies.
The problem is the system they're running is on an antiquated structure so they won't make any changes to back end system.
That's why I'm trying to default...
Hi terramobil,
Thanks for your reply.
Problem is user doesn't want or cannot change settings on WIM as they are at a remote station.
Is it possible to set staple only on all print jobs...
Hi guys,
I have a customer who wants to staple every job on a Ricoh MPC5501 from a DOS based program so cannot set it up through the driver.
There's a Lexmark X950 onsite which has been defaulted...
Hey Guys,
Looking for a USB2.0/SD Slot Type C (414949) for MP6001. 6 week lead time fom supplier. Need one ASAP!
Anyone got one out there?
Thanks
TC
Thanks Blackcat,
Guess I'll quote repair for fuser and power supply...
HI,
I've a CLX-3160 with a low heat error. Checked and replaced thermfuse as was faulty...
Error has reapperaed and thermofuse is blown again.
Any ideas what may cause this?
Thanks,
Tom
Thanks rthonpm,
Found out how to manually reset...
Clear all 107 tap copy/start key once to enter SP mode!
Folks,
Anyone know how to reset fuser error SC 542 on an spc232? Checked the manual but cant find the info for entering sp mode...
Thanks in advance.
Tom
Hi Guys,
Have any of you had an intermitting problem with "set the toner cartridge" on a Taskalfa620.
Have replaced cartridge set switch put problem has come back...
Had similar problem with KM5035. They had two models bam and no bam (one had energy saver key the other hadn't). If you updated firmware with the other model "exit tray full" would appear on screen...
Good man Zed,That makes sense!
Folks,
Looking to reset the service spanner indication for the transfer belt in the web image monitor. There's no indication on the machine only on the web image monitor. I've tried adjusting SP's...
Hi Guys,
Have an MP6500 throwing up an SC955 code every time a copy is made. Scanning and printing is working ok. Checked all connections, swapped memory dims and firmware has been updated...
...
Hi there guys,
Looking for info on error code f266 on Sharp MX2700....
Hi Frank,
I'm having the same e-511 problem on a c1100...
Any chance of sending that service code page from the service manual?
Thanks,
Tom
Hi guys,
Is there an equivalent brother model?
as the opc belt is expensive from ricoh...
Thanks,
Hey Guys,
Have any of you seen "00" jam code on a KM6030. Technician replaced duplex switchback roller and now this jam code is permanently on machine...
Thanks,
Tom.