It's better to dis-engage all the pipes and clean before anything else. Check also the gears in the toner if it is rotating properly.
Type: Posts; User: Ednicarl20
It's better to dis-engage all the pipes and clean before anything else. Check also the gears in the toner if it is rotating properly.
Maybe you look like his ex-husband lol...
I've encountered in MX-3500 the same error code, first I thought it was from toner cartridge due to dried toner inside and it is hard to rotate, but when I replace the black toner the same error...
Try first to check the fusing unit if the separation claws,upper and lower heat rollers are defective or the guide in the cassette, I've encountered some that the user didn't care if the guide in the...
The costumer is using an analog line directly to the main box of the telephone provider. They can call out (Local and International) using the handset. The number is dedicated to the fax machine...
I've encountered this trouble once in MX-4500 but when I replace the HL PWB the problem was solve...
Hope this can help...
11520Before I tried search for this fans in MX-3500 parts guide but sadly I couldn't find it...
hope this could help...
H4-01, password for Admin... this is an ABC to a copier technician wonder why he is asking for this questions...;)
H4 refers to fuser error. Try to reset it if comes back check the fusing unit...
I've encountered a lot of H4-01 220V machine plug into a 110V.
I've encountered with the same machine it only reboot, I reprogram the eeprom. Perhapse if this doesn't work try the power supply...
Dots on copies may come to a lot of area. Maybe a DV spillage or fuser felt or a HR or maybe an overtone.
AR 5316 give an error code if the laser unit is deffective...
If you know the simulation just adjust the copy life, let say increase by 5K the next time the maintenace required appear replace the consumables...
It's easy to remove the whole drum unit first remove the DV unit & then you need to remove one blue screw on the cover of the drum unit, you will see a connector and remove three blue screw again and...
how do you reset the password???:( can you please specify...:eek: I have one service call that the operator forgot the password...
Thanks'...
We encountered that error code in MX-3500 the 2 fan is located at the top of the black drum/dv unit. Just remove the transfer unit, it is very easy to find, you need only thumb screw to remove both...
Check the system setting & then look for the user control. Check what are the setting In page limit group list. You can check also in "copy setting" look for "other setting" and check the "setting a...
Discussion like this can anticipate what might we can encounter in the field. Now I have some idea and learn something with you guys...:)
Try first to replace the fan motors from process, laser and fusing unit,before you replace the boards.
Guys I'm facing some problem with this model. The machine is properly receiving an incoming (Fax) document if there is no handset. If we attached a handset it only ring continuously and didn't give...
This error code implies that the machine have a frequent jam on the fusing section. The trouble maybe mechanical or the fusing itself, try to check first the sensors if it is activating proper, try...
If it work with windows 7 before, I think even the user update or the system have an automatic update the printer must not affected. Try to re-install the driver...
I think it is not compatible with windows 7.
Now a days the copiers are not much reliable compare to the machines before, when it comes to machine lifespan, performance and technician friendly. Technology makes life easy for the user and life...
Usually high random pitch before it copy came in the laser unit or developing unit specially if the unit is little bit hard to rotate and as you said the copies are getting light. Try to clean the...
Recently I replace a exposure lamp on Canon IR 9070 because of an error code E-000222-000, after replacing the lamp the machine work for a day and new error code occure E-000220-000 I dont have any...