Clean the left edge of the glass underneath with alcohol, maybe I can have condensation .- It has happened to me a similar case. one Question.- began to do started suddenly or slowly? .- saludos
Type: Posts; User: Ronan
Clean the left edge of the glass underneath with alcohol, maybe I can have condensation .- It has happened to me a similar case. one Question.- began to do started suddenly or slowly? .- saludos
Hi. I did what you said and it works but only in the MP 301, when fixing the MP 2501, I test this model, Greetings thanks
Hello, I'm still the problem of the machine (MP 2501) not turn on, only light energy saver is on, the scanner is checked, turn on the lamp, but do not start the engine, try updating the firmware but...
hello, I have a problem with a mp 2501 aficio, when booting, you will pass energy saver, and not leave there, do nothing, try updating the firmware but can not, will not start, some help with this...
Gracias, colega!!!!:):)
Hello, you tried to change the hard disk ?. I had problems with that code on several occasions and has been the hard disk, let me know if you could fix it. regards:cool:
Hello. I had the same problem several times, in some cases as they say change the disk hard, in another were the ram memories, and in other cases have removed the hard disk, you can print but can not...
Hello. I had the same problem. on two different machines and in one case were the sensors and the other one I resolved from the web browser, at the option of the tray2 put it fixed and not auto, hope...
Hello, someone would have the service manual or parts of the Aficio MP 2500, I have one for a customer to repair but I brought quite unarmed, I assemble but I think missing parts. and never work to...
Hi I look forward to working with those who have this problem, I have had this problem and I've solved it in 2 ways, 1: adapting a light tube board the aficio 1060/1075, to do a little updating but...
Hello, I hope not too late, I had the same problem and I solved changing the hard disk. good bye and good luck
Hi, check the axis of spent fridge or terminal which connects the bias which connects the unit to the hub broce contacts the shaft magnet of the developing unit, with that you know if you passed or...
Tried cleaning the rule you have in the beginning of the scanner, which is dirty and sometimes it fails to start reading. regards
broke the main fan is back. regards
Hi I have had a similar problem with some models finisher, searching I found that the problem was the old firmware I had, the machines were used and the seller had changed the finisher. so update the...
checks the cutting blade of the developing unit or developer entered into the magnet. in the case of type 21. anything let me know how you did
I agree with bobb...
hello, yes. type 21 developer works great replacing the type 24, we've used a lot when we could not get the type 24. but you have to put only 900 grams, because it breaks the development unit. regards
Hello, you need to replace the 8 gears Paper feed section. that happens when you fall into the unit revealing feeding, changing bushings development unit and if the shaft bushings are damaged, take...
hello. for several days I'm working with the same problem and have not found the solution. first was reset daily and after several reboots started, then began to show sc 220 and have read several...
hello. I had this problem and I've solved from the pc. from the web browser on the adding new addresses, in authenticate permits, put the users and passwords and more to write down this route, I...
hello. I have a machine that shows in sc 402, and change the transfer belt, the power pack, the complete unit, main board, check the wires going to the transfer unit in case you could be making a...
hello. for several days I'm working with the same problem and have not found the solution. first was reset daily and after several reboots started, then began to show sc 220 and have read several...
Hello. I know it sounds crazy but a machine 1 month ago had the same problem, the problem was the ADF cable. I do not know why disabling the scanner but was solved with a cable that had to scrap the...
check that they are the correct thermistor. Check the voltage and amps in the line. I had problems with these codes when there are problems on the line. I hope to help you