just purchased Manual Never Mind. All.
Linuxxpwin
Type: Posts; User: linuxxpwin
just purchased Manual Never Mind. All.
Linuxxpwin
Hi All,
I have just received a Canon 2535i Copier and need the installation procedure for stirring toner into hopper or developing unit.
I would be quite grateful.
If anyone can assist me...
Hi, you may have a problem with the sensor not sending messages to the cutter to activate and cut paper.
It appears that you may have a bad sensor or damaged sensor.
Check to make sure the...
Hi all,
I have been placed to maintain a Xerox Workcentre 73XX model machine with fax feature, however on turning it on I notice a blank LCD.
I can hear the fans running, the scanning lamp...
yes i did, I even tested outside of machine it just does not get energize, after modifying with a Canon replacement, it worked then.
I am indeed grateful for all the information given.
...
Ok, Thanks to all the help, I was able to resolve issue had a bad solenoid, modified it with a Canon as parts are not available here, and got everything working, will be placing order for correct...
Thanks guys, I did clean the solenoid of the rubber stuff and replace it, but I found that the solenoid is not firing, will try another later tonight, however I may need to modify as I do not have...
Good day all, I have here a Konica Minolta Magicolor 2590MF, where the image transferred to the paper begins at least 3 inches down and while exiting fixing assembly creates a paper jam.
I have...
I am interested, very much interested my email address is csjrobertson@gmail.com
Thank yo9u very much.
Hi all, Today I receive the shock of my life someone here call me to service a clc1140, ouch, anyways I was able to fix the issue, but I think I should apply here for the service and repair manual.
...
ok, does your network carries a firewall router, in which your entire network connect through? including your network copier/printers. rule exception and tightening is done mostly at those locations,...
I was rereading my post earlier and realize I made an error in typing, I noted that the problem is definitely caused by the fuser unit, what is omitted is not this would not be a cause of the problem...
Hi All,
I am in need of the IR advance C5030 Parts Manual and System Software.
Please email me or PM me.
I would be grateful for all the help.
linuxxpwin@gmail.com
As an IT Professional I have to agree with my colleagues above about the port settings, using a different port will not solve the problem as the initial problem is still there and would now allow any...
Hi the problem you are experiencing is definitely caused by the fuser unit, I think the problem is an obvious, in a previous post you mentioned you are printing with no output, are you saying paper...
ok, this narrows it down, there are a few other things you can check,
1. Have the memory check change out or increase and test.
2. Formatter PCB can also cause this issue
3. DC PCB if you have...
ok does the ccd unit init, when copy is pressed?
linuxxpwin.
Have you tried reloading the drivers, or checking for an updated driver or drivers?
Linuxxpwin
ports are assigned to certain things with a piece of hardware: port 21 is assigned to FTP
port 25 is assigned to SMTP (Mail)
pop3 on 110 (mail)
and so on, what you can try is to give specific...
I would love to apply for this position, would you consider someone from an overseas British territory?
If so I would like to submit my application with experiences.
Please me an e-mail...
I have checked out the site very good info but I am not seeing the models I posted for support manuals, can you please direct me which of these?
Linuxxpwin
thanks a bunch I do appreciate this.
Thanks again.
Linuxxpwin
Good Day all I am in need of the following service manuals and PC manual
I would be please if you can email me
linuxxpwin@gmail.com
IR3230
IR2530
IRC5030
I agree with vigour, however before you change VR, please check your paper size sensing sensors, as I have had that problem before, a sensor was bad and another with the sensor flag broken and...
Good Day all,
I am in need of the Xante CL30 repair manual and Parts Catalogue.
If anyone can assist me, please email me csjrobertson@gmail.com
Thanks in advance.