hi guys,i have got my epson printer which is showing error 0D,I have tried to reset it at first it seems to be ok, it could do all the movements for resetting and could be ready waiting to print,but...
Type: Posts; User: RWAFA
hi guys,i have got my epson printer which is showing error 0D,I have tried to reset it at first it seems to be ok, it could do all the movements for resetting and could be ready waiting to print,but...
yes there is an error code coming out,H1-2000 THTS THE ERROR.THANKX FOR YOUR RESPONSE BRO.
hie guys,i have got my xerox machine document centre 186 which is not responding on trays,the machine his got 2 trays and bypass the third, 2 major trays are not responding at all while the bypass...
hi guys
i have got my Panasonic machine which is asking to load paper and its not processing, i have tried to change the paper lift motor and the sensor but nothing has changed,now i need to know ...
Hi guys, I have got my machine riso cz100 which is not responding if I press the start button, it only pushes the master and lift the tray paper, from that it doesn't feed the master to the drum, it...
hi guys
Hi guys i have got my kyocera km 3060 machine which is not warming up.if i switch it on it switches off the display by its self but keeps on running, showing that its warming up.after...
Hi Black cat,you a very right that is the some machine, i have been dealing with these machines for quite some time now but i havent seen the service manual,is there any one with the manual of this...
Hi guys, i have got my olivetti copier machine d copier 18mfp which is showing error sc600, so i need to reset it ,does any one knows hw to enter into service mode,i tried 1087 1087 but it seems its...
You can reset this problem by pressing the following buttons:utility key-stop 00 stop 01 then trouble reset,then do the reset.
hi guyz,i have got my Minolta biz-hub 164,the machine gives a please wait massage and doesn't copy even warming up, does anyone have an idea of what could be the fault,please help.
hi guys,i have got my kyocera km 3035 which is not recognizing toner bottle,at first the machine was not feeding toner,when i investigated i saw that the toner solenoid was not releasing the toner...
hie guys
I have got my minolta bizhub c352 machine and its coping blank,as i was investigating i saw that the transfer belt was not turning because of the blade,i tried to turn the blade meaning to...
check the seal on the dev-tank first if its not damaged,if not,check the drum seal,if u have the drum unit just change after checking the seal on dev-tank.
hi guyz i have got a canon ir 2420 which is jaming on the drum,sometimes it comes out but most of the trime its jaming always,i changed the drum unit but the problem still continues,if i check the...
did u change the transfer belt blade,if u did just try to chek the toner seal for that color.
Hi Guys
I have my bizhub 750 wich is showing error c3502,3503 i have tried to resert it but still apears,the amchine does all the warm up process and then apears this code,so please does any one...
hi,i have the manual and its saying its the printer controler board,i have changed the board bt still comes back,now i dondnt kno wether the service book is lying,i am a proper technican with over 20...
hi guyz,i have got my minolta bizhub 700 which is showing error code c2401,i have tried to reset it but still comes back,does any 1` have any idea of the cause of this code,please help i am stranded.
,MY EMAIL IS rwafawilson@yahoo.com,will be very glad to receive the firm ware,thnkx in advance.
hi guys i have got my machine biz-hub 500 its jamming on the registration section,i have tried to change the registration sensor and the clutch but the problem still continues,does any have an idea...
,sorry,is this any answer?
HI GUYS,im here again with that problem of my machine kyocera km3050,i have downloaded the service manual of the machine and was going through the manual i did get the page which talks about the...
Sorry Black cat i did understand your your equation,how do i solve it?please help im stranded master of obvious really waiting for your help.
Hi guys, i have got my kyocera km3050,the machine is giving a massage,LOADING PROGRAM it does do the warming up,it stays like that,does any one knows how to eliminate this problem,and how do i get...
hie guys ,i have got my canon 2318 machine which is giving an error 00030.000does any 1 have any idea about this error code,please help im stranded.:confused: