Search:

Hi

I was wondering if any one else was experiencing this.
I have had a few MP C2003's in the field for a while now but some of them have started to experience development unit seizures which lead...

Hi

Can anyone advise me as to what densitometor is used to calibrate the IR ADV C5045 and what software is used in conjunction to do this.


many thanks

Thanks, will give this a go.

Many thanks for the advice, do you have a link to the optimizer thatyou can post.

Cheers

Hi All

Ive got a Baron with 7Million on the clock and I'm getting wandering registration on the lead edge. I have rebuilt the reg area with new gate reg rollers etc but the reg is still not...

Thanks for your advise, I have been able to try it today and the advise worked perfectly.

Many thanks :D

The machine is brand new install and yes it has been calibrated. The copy reproduction is accurate.

Im having print quality problems with a TA2552Ci.
If I print a cyan test page from service mode the output is Cyan, if I copy a cyan page the output is cyan. However if i print a 100% cyan page the...

Hi

I have a Ricoh MPC4503 saying toner low when full intermittently.

I have replaced the dev unit and Sub hopper, also I have upgraded the firmware.

Does anyone have any thoughts please

I'm hoping some one can help.
I have a Ricoh Pro907exp with a message in the
bottom left of screen saying "replacement required soon : toner recycle unit"

I can't see toner recycle unit...

Hi

I have a Wc5775 that say scanning document continuously in the top left corner of the screen. I used to be able to clear it by turning the machine off and on but now its stuck there all the...

Does anyone know if there is a way of cloning the settings/nvm of a Ricoh and storing them to be reloaded at a later date if needed?

many thanks

Thanks Exok

No message came up when I changed the filter so I will try your second suggestion when I go back.


Thanks

Hi

I have replaced the ozone filter on a WC5735 but cant get the message at the top left of the screen asking me to do this to go away.

Can anyone explain to me how to reset the filters...

Hi

Does any one know how to get into cse mode (Service mode), on xerox a workcentre 5735.

many thanks.

Hi

No I was never able to resolve this problem. Canon UKs own technical support seemed to have very little idea about this problem.

Hi

Can anyone advise as to what these error codes on a Work Centre 5775 mean

11-477
10-132
10-102
08-190

The machine I'm having issues with will single side OK but jams regularly when...

Hi

Does any one know how to clear an E355 error code on an iR1133.

On most canons you need to enter service mode level 3 but this doesn't seem available on this model.

Does any one have any...

Hi

Does anyone know if the iR ADV C7065 print driver supports Airprint?

thanks in advance

Within the Fiery H1 there is a PS set up section, also within the PS driver there is Standard and expert color settings.

Am I right in thinking that if standard settings are used within the PS...

Hi

You need to reload the firmware.

17527

Hi

I have a Canon ir ADV C2020 Finisher that drives its tray has High as it can get it. Then the machine says that it has a paper jam when there is no paper in the finisher, even on restart the...

Hi

The C7055 is set to automatically update from CDS so should have the latest firmware on it.

Hi

The MFD is an iR ADV C7055i no Fiery.

I dont understand what you meen. The drivers on each PC are the correct drivers for the operatinf system and therfore should be compatable.