Thanks for that. I am back on site on Thursday and will check all those items. I will update you after that.
Type: Posts; User: hammer
Thanks for that. I am back on site on Thursday and will check all those items. I will update you after that.
Hi Mojorolla, the unit works for a while then throws up the code. When we sharpened the blade and cleaned the unit it worked for a couple of days then the code returned. The unit has done 18000 cuts....
Hi All, just wondering if anyone has seen this error code (F0-51) on an MXTM10 trimmer unit in an MXFN22? We have sharpened the trimmer blade, lubricated all drives, and changed the home position...
Thanks guys. We'll have a look at that.
We have had to get a bracket fabricated to replace the bracket that the trimmer is hitting at each cut is done, as it seems this part is not available.
I'll...
Hi All, we are having a jamming issue on an MX-FN22. The text below state the issue (roughly).
"The actuator arm on the guillotine was completely bent out of shape again and booklet trimmings...
Thanks Wild Bill, but this unit will not have a finisher attached - it will onlt have an output tray. Are the settings you refer to available without a finisher installed?
Thank you for that, but I've seen the service manual. We had something similar a while ago and it turned out to be the eprom. This was on a brand new device that was faulty out of the box. The device...
There's no finisher involved.
Hi Guys, i normally find myself in the Sharp Forums but as our company has taken on some HP kit i need your help. I'm sorry if this sounds stupid, but we have installed an M9040 MFP without a...
Hi All, I've come across a nasty one and am wondering if you can help out. I have an error code L4-11 on an MX-M182D. It occurs when I switch on the copier, and the shift motor moves to the rear. It...
The fan on the HDD runs
All spare parts were from a working MX2301 with similar memory modules and DIMMS. The unit is being re-built with its own boards now, but we are not confident that this will resolve anything. We have...
It was until the machine died.
Thanks for that, butthe machine is not on a network. It has been dragged into the workshop.
Hi Guys, I have a real nasty one here. We have an MX2301 that, when it boots up, the screen stays dim with the Sharp logo on it with the twirling icons. The problem is, it wont get past this screen....
Hi Buddy, whenever we have a network printer issue we would always isolate the printer first. Connect your laptop directly to the printer via a crossover and see how that goes. Print out a NIC page...
Hi Guys, I have a query that I hope one of you can help with. We have installed an MX5112 into a school that uses coin vend/student cards for copying. They also want to use this system for print...
We've seen this on pretty much all MX5112's and MX4112's.
Hi All, we have been doing some testing on the new Sharp MX5112 (finger swipe devices) and have noticed that the registration has a lot of drift when duplexing. For example, if you create a 2 page...
13757
At that price range you could try these?:)
Hi All, we are still having issues with this one. So far we have;
Replaced the Hard Drive
The Print Control Board
The Memory
PCU PWB
Transport assembly
Firmware is updated
The customer...
Hi All, just to update you on this one. We decided to change the Hard Drive and needed to do a back-up beforehand. The client is using folders that the users print directly to. When we went to do the...
Back in the dog-house! The memory didn't sort the problem - call came back in. We're are looking at the HDD and LSU. :confused: Dont you just love Monday's!
Hi Guys, we switched the DIMMs here and all seems ok. The issue was occurring quite a lot, but since putting the DIMMs in on Thursday, we have had no issue.
We have switched the memory DIMMs on our machine and this seems to have worked......so far. The users are directing some prints through a citrix driver so there still may be something in the...