Looking for service manual and partslist.
Can exchnange for xerox, kyocera, canon sm and pc.
Type: Posts; User: mascara
Looking for service manual and partslist.
Can exchnange for xerox, kyocera, canon sm and pc.
PM me ... I can free. Its a reason for Manuals4u hate me))))
I repaired the 3 devices with errors C710x without replacing the development unit. The reason for this failure, - a small scraper toner sensor, which breaks away from the auger. For repair, remove...
PM me. I can free.
1) Can I replace MDDR200-1GB (manufacturer Buffalo) in memory of another manufacturer (Kingston, Corsair ...)???
2) Do I have to order original sata cables (302K946700 WIRE CCD DATE 303M446020 WIRE...
I have do U464 and U469 from adjustment\maintence, then U410 from service mode... Tomorrow i will try U412бб, If this does not work try to re-install all
I have installed today TA4550. The machine manufactured feb 2012 with firmware 03.00.0077. Is it latest fw? I installed the machine according to Service manual but This machine had insufficient...
Please tell me what latest number firmware for TA4550ci and how many tech bulletens for this machine//Thank you
i think i have edoc dc 240 pm me
What a last version of pws? ( i have only 9.8 with crack and many edocs, full ricoh and sharp docs :o) I can change
detail as possible because I do not know much canon.
I have a problem with finisher. After machine power on i cant do booklet.All accesories on but booklet trimmer off, bottom of the screen displays "failure Finisher". after "Ready to copy" words...
C6400 ----Zero-crossing signal problem
• The engine board (KP-5061) does not
detect the zero-crossing signal for the
time specified below.
At power-on: 3 s
Others: 5 s
Your error isnt...
I dont have 3.06, because my access only for dealer ftp... I think he upload new firmware after 2-3 months((( He is slow-minded. Can you give me 3.06?
I have service manual. Today i doing downgrade firmware. Problem solved. 3.03>>>2.03
After fw uprgade every copy jams with code 6301 in left finisher tray. With upper output i havnt problem. I check all sensors and motors from service. Also I do U906, but it didnt solve this problem....
I have firmware Taskalfa_3500i_4500i_5500i_v3.03, but i think it isnt last. Can someone help me with this problem???
//i can change\help witn many ricoh, sharp, kyocera, xerox sm free//
Ok/ I reinstalled dimms, firmware reload.... Waiting call from client and i hope next call only for tk6305)) Thanks
BAd toner. 2 years ago i have many machines with your problem.
1) Change toner to original..
2) Clean with vacuum cleaner developer unit
3) Do U130 with original toner
Sorry for my english..
I have a problem with TA 4500i. When I copy or scan machine stopped with error C9500. Service manual says " C9500 Contact the Service Administrative Division".
Configuration : TA 4500i + DP771+ 1Gb...
I have a problem. Printer doesnt print cyan from jobs, status page, test copy from menu>service>.....>print test page.<br>I make drum-refresh,LSU/charger clean, dev-cln but it doesnt solve problem....