We use veto pro pac and platt cases. Bot are rock solid brands with last long products. In the service vans we also carry ridgid pro boxes with spare parts and cleaning products, this boxes are cheap...
Type: Posts; User: sanvicente
We use veto pro pac and platt cases. Bot are rock solid brands with last long products. In the service vans we also carry ridgid pro boxes with spare parts and cleaning products, this boxes are cheap...
So yesterday I been able to work with this machine again. I swaped the hopper section and the Hvps with out any luck.
I ordered the PRCB so now im going to wait.
Meanwhile im going to check the...
Yes! Changing dev and drum and uploading firmware usualy do the trick. Its weird specially because the low meter.
this is a b/w machine so no other counters. I also reset counter for fuser and...
Hi,
I am dealing with a bizhub 224e showing c2564 over and over.
It has 170k. Started to print with lower density. Another tech went and saw the drum with a scratch and low developer so he...
its a good machine. Will do the 50k per year eazy. If you use oem toner you are going to be fine. If you go aftermarket just vacuum the dev unit before switching toners (if dont you would get a grey...
I believe they are right. thats also a common problem dealing with wholesalers here They even sold discount lots of this “battery issues” dead machines for parts. Some can get back working with board...
Thats right. We are Buying aftermarket toner at oem cost for months now, unable to find dr512 or dr313 with out paying almost double that We were paying last year, dealing with this developers...
We have several c754 and c554 running with anything we can get in stock right now: tn610, tn612, tn615, tn616, tn616-l, tn611, tn613, tn413, tn618, tn622, tn324, tn514 and of course tn321, tn711 and...
We use Peugeot Partners, the diesel ones, so far so good. We can load 3 c224 separated and still keep a low gas consumption. Plenty of room even when i taking back 3 tool bags, 2 spare parts boxes, 1...
50115
IT enginer with a lot of degrees from fancy universities…
“i need stock toner, i can install it”
Beside the waste of toner, I think thats really a nice elegant blue color…
Same here in Mexico. Our regular suppliers are only giving us less tan half of our request, also our US supliers put us in back order because the shortage. Got to deal with katun but in our...
Backpacks all the way. You want to have your hands free for toner, pm kits, vaccum, etc
I used a Klein Tools electrician backpack for 6 years. It was strong, durable and worth the money. A year...
Working on several testing and non testing hospitals. PPE is provided by the company (we are the company because we are a coop). Plastic face shield, face mask, gloves, alcohol, etc. We put a kit in...
6 years using daily a Milwaukee m12 driver. Same battery. An excelent choice.
Seen a lot of machines doing that (normally beyond 500k) either c220/c280/c360 and the 4 series. As somebody say a few comments ahead is probably the hopper section. If you can swap it with another...
just for the record how much is the hour of tech service in your country? (Venezuela)
here in Mexico is $35-$40 usd... 😒😒
C253 is the same toner of a c220, just like the c451 is the same of c452.
tn217 and tn414 “work” With these machines. Also in the 4 series but in the long run the lack of developer will cause...
Integral toner (german manufactured) works fine. Used in several machines for more than a year in 3-5k prints per month with out issues. Thats tk3102.
In m2040dn (tk1175) we note a lighter black...
As some coments say in this model this could be a complicated issue. With practice and lot of time you can tray some steps we use to do to get the grinding noise away. We have run this steps with...
Hi, thanks for the advises.
We use diferent papers with the same result. 3 diferent 8 1/2x11 bond papers 75gsm and 2 diferent 12x18 thick 4 (300gsm). One 12x18 and one 8 1/2x11 where the same we...
Hated Di151 and Di1610...
Also any A4 desk color mfp from KM like de c20, c25...
Hi. Have a c454 with toner sticked to upper fuser roller. The image reapeated in the page.
43681
First we change brand new fuser unit... 50 prints and again the image repeated. Changed transfer...
Hi. Its an old post but want to know if this issue with PKI card system has been solved???
Recently bought a lot of konica minolta copiers and 4 of them had the same problem... they are bizhub...
35713
https://m.acehardware.com/product/index.jsp?productId=2938261
3 straight years, only 2 striped screwheads. With dewalt bits. Very recomended.
if u trade konica minolta please send my a mail with the list. actually importing here to Mexico machines from US.
soluciones.asev@gmail.com