ive got a dell 2150cn that is having symptoms like a fuser is failing. only problem is when a new fuser is installed the symptoms stay the same, repeating ghost image that gets worse deeper into the...
Type: Posts; User: ringling1
ive got a dell 2150cn that is having symptoms like a fuser is failing. only problem is when a new fuser is installed the symptoms stay the same, repeating ghost image that gets worse deeper into the...
i have a customer that is locking down their network as much as possible. they are asking if there is a way to disable port 14000, or if they can just block the port on the network side. does anyone...
i have a workcentre that keeps locking up with print jobs. per xerox i have replaced the sbc pwb with no change is symptom. the machine will run fine for days, then for no apparent reason print jobs...
i have a customer that is exporting their address book to excel and is asking what all the columns are. where might we find that info? thanx
recently placed a few new 7800 printers and they seem to be blowing through toner. has anyone else had this issue?
where is the developing bias contact located? i cant find it in the parts manual. thanx
thank you, will check it out
we have a km 6030 that has intermitant light copies. in order to get the copy quality where it needs to be, the dv bias needs to be set to 155(default is 117). we have tried different dv units with...
ive got a 3530 that gets jam 81 when trying to feed into finisher. machine has over 500k on it. it appears to be getting caught on the guide on the exit door. anyone been down this road before? thanx
one of the printers i updated firmware on still wants to sleep in(stuck in sleep mode) the only way to wake it up is to restart. has anyone seen this before? im thinkin about removing the hd to see...
ive got a pair of 8560s that decided they didnt want to wake up from sleep mode. after repowering they would work until going to sleep again. i just updated firmware on both of them, so hopefully all...
12 9050, 4 4345, 2 4300, 2 4000, 2 8100, 2 2420
i have many oem hp cores available for lj 9050, lj 2420, lj 4000, lj 4345. name your price.
It has duplex, made sure was seated properly. Seems to have started after firmware update?
all setting say it should be duplexing, but its not. what should i look for?
i have a lj 1320 that is blinking the attention light when a print job is sent to it. if you press the go button it will print one page then it blinks the attention light and so on. is this a driver...
does anyone have the download utility that they are willing to share? thanx
Kind of tired of getting adds for manuals as responses. Who else is with me? We all know how to get ahold of him if we need to.
have a 4345 mfp that will not lift any trays(it is outfitted with 3 optional trays) originally could only get it to respond by unplugging the hard drive. replaced the hd which seemed to correct the...
i have hp lj 9050 cores and xerox phaser 7760 cores(toners, drums, etc.) for sale. anyone interested?
fru load error on display after failed attempt to update firmware over network. is this fixable? if so, how? thanx
i have a couple lj 1320s that are in economy mode. how do i get them back to normal? i looked in the print driver and havent found anything. thanx
thanx for the input
i have a customer that goes thru a fair amount of lj 9050 toners. does anyone know of someone who would be interested in the cores? thanx
have a 7760 that has gone thru several lcds. could there be an underlying issue i'm missing? thanx