I thank you all for your submissions on this issue.
It turns out that the paddle in the waste toner container for the transfer belt waste was missing completely.
I have replaced the waste toner...
Type: Posts; User: Shadow
I thank you all for your submissions on this issue.
It turns out that the paddle in the waste toner container for the transfer belt waste was missing completely.
I have replaced the waste toner...
I have already checked the transfer belt and the waste toner container.
There seems to be a gap of about 3mm between the transfer belt chute and the inlet of the waste toner container.
I think that...
I have done all of the above suggestions to no avail.
Everything for the machine is genuine KM product.
It seems that there is a gap between the transfer belt chute and inlet for the waste toner...
Good day all,
I have a customer with a C3320i that is having an issue with the waste toner container.
I have searched the form and KM for any type of resolution - no luck.
What is happening is...
A woman goes to her doctor and says she wants an operation because her vagina lips are much too large.
She asks the doctor to keep the operation a secret as she's embarrassed and doesn't want anyone...
I have a 20 year old 3M, can't beat these ones.
Spend the extra money for the good one.
Just remember to clean it every now and then.
I clean mine twice a year, hence the 20 years of use.
Back to the basics first!!
Check the alignment of the document feeder if your getting shading on the images.
The other issue could be the paper detection sensor under the glass on the far right had...
The word that we got here was due to Chip Shortages.
KM doesn't have enough chips to process the toner.
How about Drum Shortages??
We have DR313 Colour Drums on order since last October.
A group of women were at a seminar on how to live in a loving relationship with their husbands.
The women were asked, "How many of you love your husband?" All the women raised their hands.
Then...
Husband & wife went to Jerusalem and the Wife died there.
Priest: "Sending her body home would cost you $10000.... but... burial here at this holy city would cost just $100".
Man:"I'll take the...
slimslob,
Thank you for re-posting the picture twice now, you must really enjoy it as others do.
I jest at your assumption of the new stations that others view.
This was sent to me by a relative...
I use alcohol and a q-tip on the bearings, soak the q-tip with the alcohol and run it around inside the bearings
I have used fine emery cloth to scuff up the shaft, just make sure to go cross ways...
Just about to hit 30 years in this business, seen a lot of changes and worked on many different brands.
I'll be 57 in a few months, but according to my niece I'm 114!!!!
Got to love the little ones...
With the security changes made to Windows 10 in the last couple years, scan to folder was not a priority in passing along the information to manufacturers.
I have had techs call me about SMB working...
In the most recent update of the Mac os 10.15, they have eliminated the Scan to SMB function.
I have some clients with the same issue, and this is causing problems.
As a work around each Mac user...
Have a new C250i in the shop at the present time, due out to client next week.
Our SM and I will be doing the web based training as soon as the rest of the machines for the order show up.
Had a...
funny enough that I just had a very similar issue the other day after posting here.
did some time consuming troubleshooting of the network and cabling.
turns out that a mouse had chewed through 2...
do you have the SMB folder address registered with an IP or Computer Name?
is it possible that you have an IP conflict on the network?check the power settings for the network card and ensure that...
is the client running any kind of network monitoring software?
it will also cause problems by sandbagging the machines and sending erroneous information to the machines.
disable any and all power...
do you have the network cables running through the KM supplied surge protector?
if so, bypass it completely, as I found these to cause this exact same problem with these machines.
there is no need...
My Twilight Years ~ Clint Eastwood
As I enjoy my twilight years, I am often struck by the inevitability that the party must ...
This issue is now solved.
Turns out the end user have the original type set to Letter/Legal, with this setting it is impossible to copy off the platen glass.
Thanks to those that responded.
there is no error message at all.
When a page is placed on the platen glass and they press the start button, the message on the screen is to place documents in the DocFeeder.
I am thinking that its...