Paper jam under print cylinder. Paper sensor at registration test ok; pressure solenoid test ok. What I notice is that the pressure solenoid does not activate so jamming paper under cylinder. any...
Type: Posts; User: LennoxD
Paper jam under print cylinder. Paper sensor at registration test ok; pressure solenoid test ok. What I notice is that the pressure solenoid does not activate so jamming paper under cylinder. any...
I am looking for paper pickup clutch, elevator motor, registration clutch for HC5000
Thanks for the info guys. Problem solved with the replacement of the RF Tag PCB.
Can anyone advise on what error means and how to correct
I am looking for firmware for PS7R Rip. Can anyone help?
What are the procedures to clear said error. Assistance would be greatly appreciated.
Thanks
Black spots on screen. Checked and clean lamp but still did not help. Any other suggestions? thanks
has a error code displayed S04-307. Need help on what it means and how to correct.
Update on Error code E197. The problem was the drum unit. For some reason after replacing the drum unit the error disappeared. Something new for your database.
Ok gentlemen, it took me nearly 2 months to get all boards. The problem was the PSU. I was not able to properly diagnose due to the fact that the BCU that was sent was faulty.
Thanks for all your...
I replace every board and still getting the same no power up; only main power LED on is now. No motor activity, nothing, Any new suggestion?
I wanted to know if the DADF-P1 can scan A4 documents. Have a customer who uses only A4 and notice that when they copy using A4 size originals, piece of the documents is not copied.
Can someone help me with service guide or spec sheet for canon document feeder DADF-P1
Thanks
Replaced both DC Controller and Image Processor and still getting error code E197. Any other suggestion?
keep getting paper jam indication but no paper is jam. after resetting error code E197 is displayed. Can anyone advise on which specific board needs to be replaced to correct problem.
Thanks
I am testing printing an IPF8300. When I do a nozzle check I only get a printout that shows the nozzles for "R". Is the the correct print out or I should also see for "L".
The problem I am having is...
Totally blank prints
Only printing half of page. Any suggestion on whats the problem is?
I had disconnected the HD but got the same blank screen.
I am not familiar with Ricoh machines. How can I test the HD?
Yap they were using toner from another model machine. Ridiculous.
Thanks got it going.
Black toner would not load. Keeping giving message replace black toner.. machine was down for a few weeks while customer ordered toner. When machine was turned on when new toner arrive that was when...
I know that the E024 has to do with either disconnected developing unit or toner. But not the E024-001 code. Anyone can say what the subcode means?
no keys beep. Yes there is 24 volts.