Enter your printer properties --> ports --> config port --> uncheck snmp status
Type: Posts; User: Redarmy
Enter your printer properties --> ports --> config port --> uncheck snmp status
Enter your print server properties and check your forms tab, Check if you have A3 among that list.
Hi everyone,
Just a bump for this post as I haven't really seen a solid proven resolution for this.
Basically drivers are DEFINATELY manufacture PPD Kyocera driver for a FS-C2026MFP. Also had...
I was under the impression that most 3rd party website/mail hosts block port 25 (I could've made that up, but I'm pretty sure I read it somewhere), so have always avoided using them. Use the ISP's...
Just thought I'd throw in a simple ping test to check latency times between network and device :)
mac printing options are usually within application.
So within an application when you select print, it should show the settings, now actually within the printer properties like windows. If it...
If mac filtering was enabled I would have imagined you would still get some kind of link light though. Then again, I've never really used or come across much mac or ip filtering setups.
The...
Hi all,
Had a really bizzare issue today which I thought someone could hopefully offer some insight on. 1 wall network socket to a brother printer = OK, continuous ping test = OK
Now, a new...
considering they have one up and running,
youll need the ip address of the ldap server
u/name and passwqord
and the relevant search prefixes, eg dn=company name,dn=com,dn=au
if everything is...
Check if its the KM not and doesn't have the CS in the driver name
create a new user and start from a fresh default settings. Shouldnt have to mess around with firewall issues unless your 3rd party firewall restricts it, and really the only firewall/anti virus I...
Job accounting on the Kyoceras are machine assigned, so completely seperate to AD. The best way to get Kyocera MFD and job accounting usisong AD is papercut MF. It uses an embedded application...
Hi all,
not sure if there's a sticky somewhere about this, I was wondering if someone offer some clarity and elaborate on PDL's for me.
My understanding is:
PCL (is used for faster printing,...
Homegruop may be an issue, I've 90% of my isntalls are in windows 7, only issue i had i had to create a new username and password, which defaults the profile.
I was pulling my hair out playing...
Also, SMB port it either 139 (which i think is what the mac might use) or 445 - both SMB
or FTP which will be 21
When you share a folder on the mac, depending on what version you have, I think...
what version macs?
10.7 Lion i heard has buggy smb protocols, not sure if updates have fixced it but there is a easy ftp enable via terminal. I got it working today with no hassles through lion....
ip statically assigned? If so, check yo gateway and subnet
Might have to scrap that last comment, just noticed it was a MFP, don't think they'll have an embedded feature for MFP but I could be wrong.
Not really familiar with Sharp, if it's just a small MFP,...
An embedded license is required for the machine, but first move will be enquiring with papercut MF if your machine is capable and runs hyerPAS. The embedded machine software is loaded onto your...
Muchly appreciate that T,
Yer work as a dealer but need a response from our local Kyocera dealer for their dealer number which is still pending.
Because it appears this Q&A was from 2004, I'm...
Documentation would be perfect, it seems you need be registered user?
I've emailed a local Kyocera branch to get a dealership number, but if you had some time Tmaged, would be be able to screen shot...
Thanks Tmaged, can you confirm this with any documentation? The reason I question it is because in the manual, it includes Windows server 2008 and 03, doesn't specify whether it can't be used in a...
papercut is what you want. web based
Hi all,
I was wondering if there are any techs out there running network fax drivers on a fairly large scale network infrastructure.
The issues we're having is Windows 2008 R2, and about 80...
Hi Nick,
When you type '\\<Server IP>\Public\Scans' into your 'search programs and files' field (Windows 7) or 'run' (WINDOWS XP) does it pull up the scans folder?
I guess ensure on the server it...