Try another toner cart. and or the transfer unit is cracked.
Type: Posts; User: BMSInc95
Try another toner cart. and or the transfer unit is cracked.
The toner is put on the paper by the transfer belts. Once its there static holds it in place till the "fuser" fuses it. All the timing and registation is done by the drums, motors, and tranfer units....
If you have the original sharpdesk then you dont need the button manager. You have to find the driver for win7, but the problem is there are 2 drivers for that machine and you have to pick the one...
If you don't know how to reset a H5-01 code, probably shouldn't be working on a 35ppm color machine.
SERIOUSLY!?
i would lean towards the fuser locked up, but a lot of the time its just a jam or I've seen this when the toner runs out.
If you cleaned the optics and didn't make any adjustments, just do a auto color calibration(copy). especially if the prints are fine.
there are two plastic rollers on the bottom of the door on the right that squeak, also the fuser drive gear will squeak.
check for firmware updates on everything. Especially the fax kit and the data security. They may be conflicting. Try dong a 66-10(image clear) and see if it goes away for a while.
off topic but sharps do not recycle waste toner. Especially this model. The waste auger goes to a waste container on the front of the toner cartridge.
From my experience Mac's have a built in FTP server and Sharpdesk won't work.
I have noticed alot of threads on here where people don't have a part or service manual. If you are a technician for a sharp dealer then you should be able to download from IDNC or sharpnet(for older...
sounds like its the drum. you are hearing the blade squeak when it starts up and when it stops. Never had a problem with it, its just the rubber on the drum. if the customer has a problem with it...
Had to set up an old xp pro computer to be their email server for the fax machine ( SMTP authentication) and now is working fine.
Stupid Windows 7 will not load a driver unless it is certified. Scanner driver 1.0.0.34 is old and will not work on win 7. Had to update driver manually to 1.0.0.35 which is not certified. Now...
Customer was using till they changed internet provider and now it does not work. Email server requires authenticatin. The machine can't find email server.
Customer was using till they changed internet provider and now it does not work. Email server requires authenticatin. The machine can't find email server.
Yes using button manager and did download latest version from idnc.
Update. loaded on a second win 7 machine and get same error inceficient memory. loaded on a second xp machine and all works. printing works fine on both types. is it possible that this machine can't...
I have a Sharp arm205 trying to USB scan on windows 7 and gets a inceficient memory error. it will work on a xp machine but always scans in tiff format and customer wants pdf. Help please.
I have one that I'm trying to USB print and scan on Windows 7 32 bit. No problem printing but it says inceficient memory and no scan. It will preview. Tried loading on an older XP pro machine and it...
Performed bulletin. Just replaced copy lamp, reflectors and white sheets. Did a white ref adjustment. before it was 167 and was getting error now its 181 no error. has been working now for 3 days...
Only difference I could see if they have different part numbers is the speed of the motor which would give you quality issues.
Check or replace the copy lamp and any wires associated with lamp. But good luck getting a new lamp from sharp for they have been discontinued. The lamp can light up even if its bad. have to do sim...
I have one that gets code 90% of the time when USB scanning. We have replaced ccd and updated firmware multiple times. Anyone know if the copylamp voltage can be increased or any other fixes. Thanks.