Hi Friends,
please help me.
Here is a paper jam problem in canon ir 2535 in the section s12 & solenoid. The problem is happenning because the guide which is actuating by the solenoid is not...
Type: Posts; User: dilip_22
Hi Friends,
please help me.
Here is a paper jam problem in canon ir 2535 in the section s12 & solenoid. The problem is happenning because the guide which is actuating by the solenoid is not...
Hi Friends,
Thanks all of you.
I solved that problem. I did not replace anything, just from service mode i changed value of developing bias. now machine is working fine.
Thanks
Dilip
Is it ccd unit or something else?
Thanks to all my friends
Dear Friends,
Please check the attachment as i am facing the problem in canon copier ir2200. Even if i run the p print from the machine problem is same, so pls advise.
Thanks
Dilip
Thanks Friends, I used Canon Toner GPR-6
Should i change the Dev bias value?
Thanks for your reply.
Same problem when i print pg type copy & P print.
I cleaned the optics with dry cotton clothes.
I cleaned the laser unit also.
Please advise
Hi Friends ,
Please see the attachment & advise the solution please, I replaced the new original canon drum unit & cleaned all the mirror. The machine Model is Canon Ir3300.
Thanks
Dilip
Hi Friends,
I am facing a problem with iR2520 with finisher. It is jamming the paper after passing the two way unit delivery. That means when entering the paper to the finisher. And it happening...
Hi Friends,
I have replaced the ccd unit with the flat cable & copy is fine.
Thanks everyone to help me.
Yes , document position is ok, ccd is moving fine,
thanks for ur reply, no user print list is ok, but copying is the problem. I replaced the drum but not ok, I am thinking to replace ccd flat cable, if same i will replace carriage unit, should i do...
Hi Friends , Canon iR3235N after installation it is copying black edge.
please see the attachment, I replaced the new drum unit & checked all the settings, but not ok. some time it coming clear...
hi charm, can you please give idea what action should be apply in this problem. thanks
hi friends , pls see the attachment & advise me. This type of copy is coming every after 2-3 days.
thanks friend, I checked developer , toner is enough in the developer.
magnet roller also ok.
Thanks friend, when i print user data list is ok, but for copying only problem
After few copies it will copy very clear.
Hi Friends,
I have supplied a brand new canon copier ir3235N, after installation first copy came top edge black nearly 2 inch. Then after few copies copy is ok but after 2 or 3 days again same...
Hey friends ,
I am facing a prolem when duplex copying is doing, But one sided copy is ok, please see the attachment and advise me.
thanks 11953
Thanks a lot for the help. I will do it.
Hi everybody,
Canon iR3225N copier
Error code E248 , reader pcb was burnt, I removed that pcb without P Print. if i put new pcb and turn on the machine, will it able to work?
Please can any...