Hi
We have a irca2025 with e070. We have the manual info but wondered if anyone had come across it before?
Thanks
Type: Posts; User: dickiebob
Hi
We have a irca2025 with e070. We have the manual info but wondered if anyone had come across it before?
Thanks
It is on the primary transfer roller and the larger black roller on the opposite end of the itb.
The build up was right in the centre of the roller which is whats confusing us. We know about the issues where waste toner can get underneath the edges but not right in the center and nowhere else?...
Hi
We Have had a few instances where it seems that waste toner is getting underneath the transfer belt and sticking to the rollers which in turn causes raised lumps to appear on the belt, this...
It displays the error on the machine display
We will try that thank you for replies.
Hi
Thnks for reply but no inner finisher just basic machine.
Hi
We have a machine that is asking you to remove paper from the output tray when there is none present.
The sensor arm is present and functioning correctly.
If you restart the machine it willl...
Hi all.
I have a canon irc 1028if which has the green light on but no power.
Can someone please give me a heads up on which board has gone if they have had the problem before.
[QUOTE=Rakesh;422586]Dear All,
i need part code for Reader Slit Glass / ADF Model for (Canon iR2520 With DADF Model)
thanks[/QUOTE
FL3-3144-000
Hi all,
We are a Canon dealer. We have a customer with a Ricoh MPC2800 which is non-contract. The machine has stopped printing and the copystart key does not go to a ready state when you switch...
We have set the settings to different modes and it still happens also the machine has run like this with the same settings fine for the last 18 months.
The fuser temp holds steady.
Thanks
Hi
we are experiencing some problems with fusing issues but mainly/only on magenta.
It is intermittent and quite severe.
The documents tend to be high colour coverage.
We have gone down the...
Intermittent E315 -000D. It happens when printing from mailbox. Any idea?
Hi
We currently are experiencing a fault wit a canon ir2520.
The customer sets an a4 document on the glass and the copier thinks its a3.
It works fine from the document feeder, the office is...
Correct - you can not put mailbox lite on to a 2030l without a hdd.
Thanks - like you this is what we have been doing for years, yet suddenly it won't let us import. Different machines, different customers, different networks!
Hmmm... very odd. Not sure where i am going wrong. Are you inputting the password before you export?
When we have installed a new machine into a customer with an existing ir machine, we have always exported the address book from the old machine and then imported it in to the new machine, all via the...
Thank you. What does the auto grad kit comprise of?
We are going to be installing an ir adv C7200 series machine as a printer only version. Does the fact that we can not do a full automatic gradation adjust cause any issues?
Just noticed that the paper feed B tyre on the new 5200 range is a castle-ated tyre yet the parts catalogue still quotes it as FC6-7083. Is there a part number for this newer tyre as it looks more...
It will be either the drum units or developer units.
Had this yesterday - black dev drive clutch, gear on the end broken.
You don't need to get into service mode - just hold down the 2 and 8 button when you switch the main power on until the download screen appears. Sorry if I have mis-understood and you have tried this.