Too expensive,,, I will wait for another offer ...thanks
Type: Posts; User: mterrero
Too expensive,,, I will wait for another offer ...thanks
What do you want to say I do not understand ?
Small modifications prevent it from fitting, I have one of the MP6001 model and it does not fit...
Hello , I need a Front Door for a Ricoh MP6002 ( Part No. D131 1301 ) maybe is the same for others models, somebody with one that can be sell to me ? with shipping to Miami..
Email :...
Hello,
Does anyone know any application especially for Copier Maintenance and Rental (Maintenance Control, Toner Dispatch, Parts Replacement, Meter reading and invoicing, etc) ?
Regards
MT
Ricoh MP6001, when two side copying on the DF ( single pass ), the image on the back ( Sometimes ) goes out unreadable, ( please see example attached ), when you turn off and on the machine, the...
Remember the whole developer unit and PCU unit were change, Transfer unit was change but with the same transfer belt,
If I power off and let the machine rest for a couple of hours, the back side...
One side copying or printing is ok, the problem is the back of the page when duplex, if you run more than 500 copies one side ( without duplex ), everything is ok,
Only back side is light after 200...
Hello, Ricoh Aficio MP7500, after aprox 200 copies/prints, the density is significantly reduced on one side of the sheet when duplex printing, one side printing is ok,
Developer unit, PCU was...
send me your email to mterrero@gmail.com
Hello,
I am looking to buy a Ricoh MPC2500 (B2315782) and MPC3000 ( B2385781 ) controller, If you have one and want to sell it for a rasonable price, send me and email to mterrero@gmail.com
...
You are Right, Optic Mirror are dirty,,, Finally I change the NVRAM, ( Problem Gone, ) Good print quality and Density, what was the problem ? dont know, maybe somebody did a Memory clear or some...
All PCUs were, interchange and the problem remained, Generic Toner, but the mpc2500 is ok
Hello, I have two Ricoh Copiers ( MPC2500 / MPC3000 ) the MPC3000, is printing the Blacks tones on low Density, please check images attached, both machine has the same firmware versions, no fuser or...
Problem solved,
Paper Size
SP5-959-001 ( Tray1 )
SP5-959-005 LCT ( Tray 4)
how this changed by itself, ???? Mistery
Aficio MP7500
Tray 1 and LCT changed from Lettler size to A4,
SP5-131-001 doesnt affect,
any idea or setting I must check
Thanks for your help
Hello,
I want to buy used Ricoh copier on USA / Florida, they will be imported to Dominican Republic
no yellow, no extremely dirty machines, passing paper will no be enough, no big orders ( 2...
Hello,
I want to buy Ricoh used, good condition machines on the Miami Area, they will be import to Dominican Republic
can you suggest me someone, the last year I bought good machines ( looks new...
Whats the main difference between the Ricoh aficio MP4000, MP4000B and MP4001 ?
Finally the was the indicated part Broken on the Duplex Unit, causing the paper to stop on the fuser
See attachment..
Thanks for you help..
This will Print the whole SP Mode,
I will be uploading the whole sp Print Mode on Friday, Tomorrow Is Hollyday here On Dominican Republic
I haved been working with Ricoh Machines more than 10...
The complety fuser Assy was replaced, and the problem was the same way..
I will check the sc history, where can I look for the jam code ?
Hello, Ricoh MPC4500
I have a paper Jam when feeding 11x17 or 81/2 x 11 ( Letter ) on long edge, short edge or Legal size is ok,
I changed the fuser unit and the transfer roller from a working...
Did you find a solution for that, I have the same problem on two MPC4500 ?, the MPC2000 and MPC2500 printed perfect the same job.
I would like to hear if there is a solution...