Do you clean the sensor in the drum unit?
Type: Posts; User: limo
Do you clean the sensor in the drum unit?
check your manual page 618
You can use the SMC HISTORY TOOL. There is an explanation for the codes with a lot more information for the condition of the machine
The bullentin was released just last week and i think is not only for the METIS-3 series but for all the m/cs using the SOP V2.5 and all the future models using the same SOP.You can see the average...
The modification and firmwares are for all the current single-pass df even in some PRO MACHINES.
Not available yet in Application site (at least in Europe)
Bulletin is removed from the website.was present for only two days.I dont know the reason may be pricing reasons.FIRMWARE IS PRESENT FOR ALL THESINGLE PASS FEEDER
Check the latest bullentin.firmware plus new separation pad pn d6839102
Dear all
I think iam not the only one who gets frustratate with the sc 670-672 errors.so many reasons with so many models. the situation is getting worse every date.So i propose to create our own...
Firmware is uptoday.cables are reseated.Strange thing is the time of the occurance only after waking up from sleep in the morning
the code is generated in the morning after exiting from sleep mode.Replacing hdd reloading nvramdident help.will try controller.
Anyone have seen that. only in the morning afer recovering from...
we are using only original perts but the problem started in a brand new unit at approximetly 30k .blade was replaced but after 5k same thing .complete pcdu was replaced because third time pcu was...
recently we started having strange failures with the cleaning blades for the mp 54/5 series .the cleaning mechanism of the above model was very reliable up to now, more than 200k but now we started...
check the quenching lamp above the drum
Clean the surfaces of the polygon motor mirrors.
use the installation procedure but from end to start
Print the G3 dump list after a failed reception and check the protocols excanged to see where the problem is and enable the speaker in order to hear the sequence. May the line is cut in between and...
Problem was found with the toner pump, working but not feeding enough toner in the correct time to fill the toner hopper.
All the firmwares are uptoday and that firmware was installed years ago to just save some toner.The problem happened in 3 different machines and with all the different colours.Something similar was...
After a correct Toner end condition (empty bottle) the m/c is accepting the new bottle (full on the panel) but for some reason after a number of copies you have again the toner end message.If you...
Anyone with the same problem or more information on the issue
I am aware of the Modification Program and we have already impent it but most of our cases are with the MP 402 which is having the filters installed at the factory.Also there is a reissued of the...
Filter or no filter the problem still happens and if the problem is the absense of the filter why is not happening in any other model?Now they are talking about foreing materials in the cassette or...
The firmwares are keep coming but not any official information what is changing in the machines.Any op company of RICOH issue any details and i think is not for the lot 6 but for the lot 26 the...
Recently a lot of firmwares were released with the scope*adherening to the Lot 6 of the Eu*.
I know what the ErP lot 6 regulation is but does anyone in EU have any more information about this...