I had similar problem on C7000 with Cyan line and cause was dirty Erase LED bar below Charging Corona Unit.
Type: Posts; User: Outlander
I had similar problem on C7000 with Cyan line and cause was dirty Erase LED bar below Charging Corona Unit.
Try to clean shaft and One way gear at paper exit, even better try to replace that gear p/o A03U909502
It worked for us :)
As canonbundy wrote:
PCL6 is for Black, use PCL5 for Colour
Yes it's possible, and you'll get another 60 days, but you'll loose counters.
If you put a Network Controller, there's no way to scan without additional scanner kit. Sorry.
Toshiba said: It's no bug, it's feature :(
USB: Twain driver USB print and scan
Network Controller:...
I had very similar problem with eST351c. Try to look at thermistor/thermostats at fusing section. Sometimes there's too big gap between them and belt/rollers, and temperature drop after few copies,...
You can not put a Network kit on that model. Maybe you can try with SEH print server. Toshiba officialy supports them and in some countries they sell them as "network option" for 181 model. IMHO...
Mitsubishi Colt for city center, and smaller installations.
15254
Citroen Berlingo for bigger jobs.
Do you have Print or Print/Scan Enabler for e-STUDIO350, maybe?
Thanks
What parts do you have for Toshiba machines? Could you send a list with prices via PM?
Thanks in advance!
Last official version for MJD is T350SY0E4006 since 2007
DF-KIT-3018 kit for document feeder MR-3018:
6LE50297000 ASYS-ROL-FEED 2pcs
6LE50296000 ASYS-ROL-RET 1piece
ROL-KIT-1010 kit for KD-1019:
6LA93778000 ROL-PICK-UP
6LA93771000 ...
Small mistake. It's not 05 it's 08/971 Toner near empty threshold value
sorry for question, but did you tried with that 08/695 code on e181 machine? Unfortunately I don't have machine to try. From time to time, Toshiba releases a new version of Service handbooks with new...
There's no info about it at Service handbook, but at series before 181 (163/166) we could do that through 08/695 code (from 1 to 0). Function of that code is:Checks whether the toner cartridge is...
Try to see if 08/255 is 0.
0 is default for automatic detection of LCF.
When you get some error at LCF side, some machines simply disable LCF and let machine working without it.
Hope this can...
Always use the right Service handbook. Don't relay on "It's look like" and "it's very similar".
BR
Tom
Procedure for FW upgrade is in the Service Handbook, and not in Service Manual!
Usually you will be able to download complete CD from web cca 315MB (Toshiba Viewer 2.0), it'sISO image. Burn disc and try to install.
For Firmware upgrade, on models 163/166/203/206/181/211 and...
Sometimes there's no need for replacement. Formatting and just follow procedure for replacement and partition of HDD at Service handbook. Of curse you will need FW.
Not enough info for right solution :(
Usually if you have original CD Toshiba Viewer, it runs installation via Autorun. After few steps you must put USB cable into e-STUDIO and Tur on the machine....
TOSHIBA Test Chart with How to use instructions :)
http://dl.dropbox.com/u/51824633/Toshiba%20testchart.rar
My friend, you still have, at right side, regular hard keys (numbers). When you get to enter admin mode, put a number 123456 with hard keys-numbers and you are in...piece of cake!
1.
Applicable models
e-STUDIO163/203/165/205/166/206/167/207/237/181/211/182/212/242
e-STUDIO205L/255/305/355/455
In the above models, image deviation and jams (E010/E020/E570) have been...
fuser lamp 220V
6LE58630200 LAMP-HTR-C-371-MJD
6LE58631200 LAMP-HTR-S-371-MJD
upper finger
6LE58405000 SCRAPER-282
thermistor
6LH27402000 THRMST-HTR-284