Search:

Thanks for this information.
I cahnged all the gear groub (9 greas) and the one way arm and bushing, but it didn't work also the solenoid woks good when I chach it partly (Part-CHK).
are there in...

Pls note: the OEM Part # you mentioned is not in the service part catalog for this model IR6000

May you mean FS6-0105-000 GEAR, 22T/60T and another gears ?!
Thanks

I changed the gear group of it the was 2 greas broken. The cleaning web dosent move I must move it manually. The sloenoid work.
Help

I and many others got much help in this forum; much more any other forum in the world, by many members participation on solving threads posted especially "teckat".
Now I think some look for other...

Thanks all. I found it

The separation roller shaft wasn't secured in it right place

also PS21 spring wasn't over the sensor arm.

Now it works good. and copied 20 repeteive papers.
thanks...

It still jams with the code 0105 again

and the paper pass through the feeding roller and the separation sponage (I can hardly catch it with my finger nails from the Right Lower Cover of the...

thanks all.

and now when i tried to copy 9 repetitive paper from cassette #3 it gave

jam code is 0105 again
So it is a dealy jam / vertical path 3 paper sensor (PS26)

help? what is the problem with it?

No . this happened when I copy and print and it happened most of the time.

The paper size I use when it is in Cassette 1 or 2 it is A4 but when it is (the same paper) in cassette #3 it is A4R


also at:

copier>dispaly>CST_STS
width-C3 A4 R

I cleaned it but it now give jam code 010D
cassette 3 re-try sensor (PS21)

the jam code is 0105
So it is a dealy jam / vertical path 3 paper sensor (PS26)
What does it mean?? wht should I do? thanks again.

is it for tech only this night, it night now here. I don't want to stay to the morning. Could heip? thanks

It didn't give a jam code. Just jam at the cassatte # 3 only the paper didn't leave it and the copier show jam at touch screen. The machine copied about 2 m till now (the counter show that).

I installed a new pickup roller, feeding roller and separation sponge with new ones, sill the feeding through it make jam in repetitive copies.
What is the real problem? Thanks.

I think NO you can't do it. You must repair it or get a new one.
Also you tray to download the System Software of this machine before buying a new HD.

The door SPEC of Ir6000 is OK, but feeder alignment leaves about 1.2 cm at the begging of the portrait paper so it lose it the end of the paper. It Ok with landscape.

thanks all. it was optics.

attached is printed test page then copy of it from the machine copy glass.
i feel the toner is very bulge in the printed (with my hand).

Good but this way save too much (the printed paper is nearly faint). aren't there a way between?
thanks

I installed the PCL5e-c_6_v8.80_v6.80 , think it the latest. Still the same proplem.

pls note: the machine is ir 6000dn not B/W not a colour.
so how to CALIBRATE

How do i know imagePASS L1 is connected or not?

Cloud you mention the latest print driver for me to download it.

thaks so much.

There is too much toer when printing only.
Canon IR 6000n
by the way it was also in coping but i solved it by reducing Copy Dens from 5 to 2 (Copier - Adjust - Dens).
but don't know how to reduce...