looking for the service password on this printer anybody thanks T.
Type: Posts; User: northerntech
looking for the service password on this printer anybody thanks T.
Thankyou CHEERS!
a reply to both of you No and No with the new print head was a instruction sheet (and as a man i did read it first) i was suppossed to upgrade the firmware of printer then install printhead....
i did a head swap on this printer now i get an error code E02802 and the printer will not accept new head any info anybody? in the service mode history there are alot 040000 codes as well. thanks!
try setting to double ring agian, make to press the set to set in the double ring, then print out a config page and see if the machine accepted the seting....
i 'll bet there is a chip or a blowable fus on a new tr belt assy. and the real kicker is there is not one on the first (original) belt because it counts out and the fuse blows and resets the count...
try a better quaility of paper..... try feeding paper upside down.... try lengthwise as opposed to widthwise... there is no temp adj on copier
i you have a measurement of the distance of the mark i have a chart tell you what part is thats causing the issue
awsome little box minimal parts to stock, they just keep on working...
what is the # on the cart?
THANK YOU!!!!
i know this is a laser related error. what is done to repair it? had to edit this as brought machine to shop and now has error 23
try an all clear through the service mode! it will wipe out all info programmed in like fax #
google it you will find your answer
is the pre transfer the same curcit? and maybe its shotred out? it been a while since ive seen a np..
customer network is okay with other brand printer, IP adresses are all okay, can ping ricoh, can print windows test page, customer can print, then all of a sudden no print, no ping, green processing...
there is a chip like device in the drum unit and in the toner unit... if you can source the chips you can reuse the drum... and if you find chips and toner you can refill the toner unit
2800 has been resolved flashed machine with new firmware all works now thanks
talk to your techs and see what ideas they have to solve the issues...
yeh sorry you are right. i will stew some more and see what i came come up with
not sure why you choose the dc cont. i would be more inclined to replace main cont.
my customer has a c6100 and the belt loks to be in good shape is there a way to reset the count so machine will stop given a belt life end???
a customer wants me to maintian there 1050c plotter it is in need of a maintenence kit with out a manual can the service be done? i was trained on a 650c years ago. is there any service mode i need...
i have an cp6015dn that makes a clunk sound when lifting tray 2 loaded with 24lbs letter. it has just started doing this and it comes and goes but getting more often. will not do it if cassete is...
i thank you very much for pointing this out