Search:

Type: Posts; User: superphamicom

Search: Search took 0.01 seconds.

  1. Replies
    2
    Views
    1,707

    Re: RISO MZ990 T64-539 error

    thanks for your reply, I had a tech flush out the drum to prep it for a color change. I reset the machine and ran it a few more times and it ended up fixing itself!
  2. Replies
    2
    Views
    1,707

    RISO MZ990 T64-539 error

    Hi all, I recently cleaned out a drum and when attempting to print with it, had this error message returned:

    T64-539 System Error

    I reset the system as instructed and no dice. Does anyone have...
  3. Re: Weird tearing of masters due to separator?

    Ok, fixed this one myself. since it was just an issue of the separator not clearing the drum by a few mm, I just forced the separator itself down just a wee bit by bending it. It's plastic so I...
  4. Re: Weird tearing of masters due to separator?

    Hi, thanks for the reply. It's an MZ990, and yes the scratch is dead center. I'm 100% sure it's the separator, I figure it's somehow positioned too closely to the drum.
  5. Weird tearing of masters due to separator?

    So this is a bit of a bummer. When I get to about 70+ prints on my violet drum I get this tearing on the master. The result is a lot of ink spillage on the page. I'm pretty sure it's because of the...
  6. Re: Converting a black MZ 990 drum to color

    PM sent, thank you!!!
  7. Re: Converting a black MZ 990 drum to color

    Thanks for the advice Jeremyth. Actually this particular case may differ from what you describe above; I'm not attempting to convert between two colors in a drum, I'm trying to convert a black drum...
  8. Converting a black MZ 990 drum to color

    Hi all, I've got a spare black MZ drum that I'd like to use for red. As far as I know, they're not made to do so (different PCB, slotting for the tubes, etc), but I was wondering if any of you might...
  9. RISO MZ1090 drums compatible with MZ990?

    Hi, I'm interested in purchasing an MZ1090 drum listed as a "10/8." Not sure what the 10/8 means, but in general are 1090 drums backwards compatible with 990s?

    thanks in advance to anyone who can...
  10. Possible to swap parts between a GR 3750 and GR 3770?

    So I went ahead and bought a GR3770, a little worn (5 million copies) and not quite working properly (paper constantly gets jammed, I think the drum is mis-timed). I currently own a GR3750 that works...
  11. Re: Looking to purchase a GR 3770, high copy count

    Thanks for the reply. I currently own a GR 3750 and an SC 7500, so I figure compatibility with that as well as the extra drums is a factor for getting the 3770. I'm really attracted to the 600dpi...
  12. Looking to purchase a GR 3770, high copy count

    The one I'm inquiring about has 3,000,000 copies on it, haven't found out how many masters. Asking price is 750$

    The question I have is, I've heard that these machines can run indefinitely,...
  13. ppd file for SC 7500 to work with GR 3770?

    Hi, I own an SC 7500 and was wondering if it was compatible with a GR 3770? If so, does anyone know where I could find the corresponding ppd file?

    thanks!

    John
  14. Re: Greetings and Riso GR 3750 networking question.

    Do you have dropbox? If so, we can share it through there. Let me know if you don't and want to sign up, I can get a referral storage bonus! Otherwise we can pm each other the specifics.

    -John
  15. Re: Greetings and Riso GR 3750 networking question.

    excellent, glad you got it resolved. Happy duplicating!

    What's the Riso "Technopedia?" Is there any way you can email me a copy?

    -john
  16. Re: Greetings and Riso GR 3750 networking question.

    also forgot to mention: if your ppd file is in the correct location, the SC5500 should show up as selectable in your printer system prefs (system prefs>print & fax).

    Also, make sure all the...
  17. Re: Greetings and Riso GR 3750 networking question.

    Ok, so you've directly connected the RIP to the computer via ethernet? Having a router/hub connected won't necessarily help the problem imo, but give it a try. Also, do you have the correct ppd? Make...
  18. Re: Greetings and Riso GR 3750 networking question.

    check on this thread where I described how I was able to connect my SC7500 with my GR3750:

    http://www.copytechnet.com/forums/digital-duplicators/56582-im-desperate-gr3750-vs-sc7500.html
  19. Replies
    7
    Views
    20,150

    Re: i'm desperate: gr3750 vs sc7500

    I recently got my SC7500 to connect to my gr3750 flawlessly. the key is to make sure you're running an OS no later than Leopard (it's the last one that supports AppleTalk), place the ppd file in the...
Results 1 to 19 of 19