Thankyou for your reply and yes i did change the two pickup rollers in tray that is not feeding single sheets correctly. I have changed the sep roller kit the other gentleman is describing on trays...
Type: Posts; User: pbbsinc
Thankyou for your reply and yes i did change the two pickup rollers in tray that is not feeding single sheets correctly. I have changed the sep roller kit the other gentleman is describing on trays...
60276This is the tray1 i am asking about and there are no sep roller kits to be found on the tray? This tray sits right under the (bypass/multipurpose tray on a MX410 LEXMARK.
I APPOLOGIZE IT IS ACTUALLY A MX410DE NOT A MX611DE! I was in error the dealer told me wrong but this will clarify the tray1 does not have sep roller assy.
Has anyone found a way to separate the...
The Tray1 is the machines tray under the bypass or multi purpose tray and there is no separation rollers on a shaft as you described only the option tray2 has that?
This tray i am referring too does...
P_ON jam is the jam error created when copier is powered off then on with one of the sensors actuated. check the state of the fuser exit roller right below the exit sensor to make sure its film is...
After running the printer it seems a clutch or a one way is sticking and the feed timing is 25% faster than same model. The tray1 that does not appear to have a separation system will shingle feed...
We are looking for a self-motivated service technician for Palm Beach, Martin, St Lucie, & northern Broward counties. We are a growing dealer with a great bunch of people & are looking to expand...
I think we have 2 Ricohs left in the field. Only selling used equipment got old, & wa costing us a bunch of deals, so we became a Panasonic dealer in '06. When they stopped making copiers a few years...
A coworker & I went into business selling refurbed ricohs 25 years ago. My garage was the Whse/shop, his spare bedroom in his condo was the office, & we delivered machines out of a nissan pickup & an...
I dont know about Philadelphia, but Impression Solutions in Mississippi, is great to work with.
Using the 607 kits instead of the 407s to rebuild the 30 - 40 ppm fusers helps a bit as well.
We tried it on a couple, half-expecting warmup related codes, but haven't encountered any thus far.
Wondering if anybody out there offers per foot service (without supplies) on wide format Designjet plotters & equivalents.
We've been servicing them for years on a billable basis, & want to start...
Sorry... Its "replace photoconductor"
Ill change the other post.
They have been replaced individually as they caused print quality issues (so shouldn't all pop at once) & none of them are beyond their life.
I have a machine that keeps calling for all photoconductors to be replaced. Was doing it every once in a while, & is now doing it after a few pages are run.
We've replaced the I/O board, BICU,...
Does anyone have a P2P for this machine that they could share?
I have one that keeps displaying "replace photoconductor" messages for all 4 PCUs at once, & Im trying to determine which components...
We are looking for a self-motivated service technician for Palm Beach, Martin, St Lucie, & northern Broward counties. We are a growing dealer with a great bunch of people & are looking to expand...
At the current price of $2.81/gallon, & assuming 25mpg, 11.24 cents/mile of the 32.7 cents/mile should pay for gas expenditures. The remaining 21.46cents/mile compensates for those expenses,...
I pay my techs a rate that I adjust quarterly based on gas prices in my state (Florida) & the assumption that they get 25MPG (if they drive a hot rod, they come up short, & if they drive a Prius,...
I have it (NEC version... IT45C4, which is identical, but FSM is 30MB & wiring diagram is 83MB.
Do yo uhave a drop box account?
jay@sosfl.net
I have TWO MX-3640n that will display a load paper tray1 message and when I go to copier both 8-1/2X11 trays show empty even though paper is present in the trays. All that is required to get it to...
I have TWO MX-3640n that will display a load paper tray1 message and when I go to copier both 8-1/2X11 trays show empty even though paper is present in the trays. All that is required to get it to...
I am looking for a self-motivated service technician for Dade, Broward, & southern Palm Beach Counties. We are a growing dealer with a great bunch of people & are looking to expand south from Palm...
Thought of that, too, but we cant even get a brand new, out of the box MX-3070 to work.
Obviously something network related changed somewhere but, since we are the IT provider & their software is...
I have an MX-3640 that is set up to FTP scan. The customer scans from their office to their software which is hosted on a server at our office.
It has been working for over a year & suddenly...