Search:

Ended up being the fans on the back. They were filled with dust and not spinning properly, after a good cleaning they are working fine and no code anymore.

OUr bizhub pro 1200 keeps coding out with code C-3906. We found the tech suggestion that says to take the back fan covers off and it should be fine. We tried running 11x17 (the tech article said it...

We have 3 Konica Minolta's in our shop and one Ricoh. We have a Bizhub Pro 1050, a Bizhub Pro 1200, and a Bizhub Press C8000 for KM and we have a Ricoh pro C900s. We love our Konica's and hate hate...

I'm very new to this as an end user so take it for what it's worth. When we have a problem like this on our c8000 or Ricoh C900s we go into the device center on our command workstation, go to...

Yesterday the cleaner blade got all gunked up and had to be cleaned and upon further inspection the fuser roller in our coated fuser is once again begining to chip away about an inch to and inch and...

You have to adjust your settings I believe.

My fiance has an iPhone 4, she loves it, I mess around with it from time to time. They are both good phones, but its all about what you want to do with your phone. The android can be rooted and...

We finally got our service tech replaced for the time being with the next level. He was in yesterday and finally replaced the oil lines, oil pumps, cleaned out the tank,and did an oil change. So...

No I just run the updated Serendipity 7 kernels when they come out

I'm running a rooted Samsung Galaxy S with the Serendipity 7 rom, I love it. As everyone is saying the battery life sucks on android devices but I have found that running the app JuiceDefender has...

Thank you for the info, greatly appreciated

UPDATE

The tech on friday and replaced the transfer belt, it was dimpled and had some lines on it. I havent had a chance to really run the machine yet as I was on press on friday for a big order....

After the noncoated fuser was rebuilt it began to give us problems also, we were getting multicolored smudges on the edge of the paper and spots on certain areas on the page. The roller was replaced...

Right now we are using one fuser for coated stock and another fuser for non coated stock. The one for the coated stock is giving us alot of problems and is the one that had the blade disitigrate...

Agreed, we've spoken with his boss and supposidly the engineers and a handfull of others from ricoh will be coming out

as far as I know when two techs came in and ripped into the machine that was supposed to be done, all that we can verify that has been done was a filter change. As of right now the engineer and a a...

Will speak to him right now about that, never even crossed my mind about that

*Update*
Tech says theres no way thats the problem

Thank you thank you thank you

I wish that was the problem, it was running fine prior to this, 100# coated text is pretty much the main stock we run on this machine and the settings are alwasy the same Thick 1 Coated 3 as per the...

so a new update. the tech came in and took abart the fuser to replace the roller and again the blade has pretty much disintigrated, shattered, broken apart, what ever you would like to call it. I...

that sounds like a good idea with the fuser, I'll have to ask about that becasue at this point we arent going to do anything Ricoh doesnt tell us to do becasue we may be claiming this as a lemon. We...

12378

Yes, we have two seperate fusers, one for coated one for uncoated. We swap them back and forth constantly, the time varies anywhere from 15 min up over night. The tech kept refering to is as the...

Just another update. It seems our roller for our coated fuser has been chewed up after less than 20,000 clicks and the gritty feeling on the black is burn marks. Has anyone had any experience with...

just an update for anyone who is following the thread. Our service Tech came in and did a full PM along with another more knowledgable tech. The replaced just about everything, rebuilt the fuser we...