Parts from Parts machines. Most items available. no drums or ITB.
Type: Posts; User: Simons
Parts from Parts machines. Most items available. no drums or ITB.
9313-1100-41 Anyone have a good used one?
If you were in the USA having to talk to customers about Obsolete OCE boxs and how they are not Canon boxs and Canon bought OCE yada yada yada. You might want to be sure that the next machine the...
UFR is still being updated for windows 8.1 The others PCL and Adobe stopped late last year. Do you think Canon will pull the plug on driver support for this family? If they did I think it would be...
Since you have scan lamp problem something serious is wrong but here are a couple other easy things you may have already done.
recheck bias contacts on ITB and frame if you didnt.
This has...
This engine is much like the 3800 HP and on that 3800 if generic toners were loaded you could really screw up the toner sensors in the back. Big damage to the printer. The email doesn't support SSL...
Do you ever see a glitch or issue about this? Seems like there is some unneeded shifting going around at the home sensor position. No error or problem. Its not the controller either. Ever seen this?...
More great advice from a cool cat.
You can get the films here. BEST Office Products - Canon & HP Parts & Supplies - Home Made in Germany.
You get the Krytox GPL205 here Krytox GPL 205 Grease, 2 oz. tube
Many years works...
Anyone see this too much back and forth when going back to home?
I keep all the area clean esp since other company used to let low rollers work forever with blown bearings. What a mess.
Yeah old post. The bottom flip out one needs replaced. Those guides were replaced and problem solved. The big pick up guide were getting busted sometimes too. They are happier with it than they...
The most likely cause for " insert the unit " is that the horizontal motor needs replaced in the duplexer. The gear cracks and causes weird stuff. Believe it or not. I cant remember if a jam is...
Interested in knowing how you are going to cure this mess! The generic toner cant be a good thing in this machine.
if the transfer voltage is a little high and all other look good. Replace the HVT...
there was a tech pub about this. Canon said that the user needs to actually cycle through the copier screen instructions for toner replacement when putting in a new toner. ONLY by doing this will...
mine is for sure a blade. It looks like the drum doesnt have to come off. Looks like it can just push in under the drum ? two screws on each side. Is that it?
Do you have rebuild instructions, I have a couple cyan drums that started a streak in the back. Katun Toner. kinda old drums though. I just need to replace the blades but dont know how. thanks
Anyone replacing blades on these? Would love to see the info. No spares to sacrifice at the moment. Stop freak streaking.
I would like to see a compare to printing. Looks like toner on wires around reader controller can make this background but less severe on 4570. For sure go back to door specs. Good you tried...
LOL Written off. yeah, that would have been great to give that news.
Everything is clean. This kind of condition refers to the sensor, harness or controller. Should be able to rule out the scanner unit. Need more time on it. Most of the time machine is ready at Auto.
This machine sometimes does not go back to AUTO. Will sometimes report " Load Paper or check settings the most proper size STMTR is not avaiable. This happens after making a copy sometimes. Open and...
Check for PM soon
I have searched all over and no one here or there has this manual. Any of you have Fujitsu Scanner Manuals?
Anyone ever done this on this machine.