pliz any one availme with the Parts & Service Manual for this problem of c220 to see whether i can get the solution for this
Type: Posts; User: bkamoga
pliz any one availme with the Parts & Service Manual for this problem of c220 to see whether i can get the solution for this
hi thanks but where is the tonner recyling drive located in the machine
Hi all l have achallanging problem on biz hub C203 its making noise
when its stablizing and after the stablizing the noise stops
and when you do run papers in the testing mode u hear no noise ...
But the NVRam is embbeded on the MFP board
it is inseparable
lam atechnician my self and some body bought it as a second hand machine from dubai so he can not a locate
the techinian and the machine is in uganda (East africa)
any help pliz
I have a printer bizhub C350 and l cannot go in to its service mode l have tried all the password utility check details
stop 00 stop 0 1 and then it displays (.................) Enter. but the...
I have a c350 and i want to configure it to scan
using pagescope Box operator , l tried to create the user box in the machine but i falled
some help pliz thanks and yet the machine has a...
kindly if u have it give me the procedure on how do it
thanks pliz
yes it has the had Disk
some help
I have a c350 and i want to configure it to scan
using pagescope Box operator , l tried to create the user box in the machine but i falled
some help pliz thanks
I have aprinter C350 and l canot go in to its service maode l have tried all the password
stop 00 stop 0 1 and then it displays (.................) Enter. but the passworg i have tried
00000000...
c220 double impression
Double impression at what interval? If it's the fuser it should be 175mm
l dont understand this value pliz some guardlines thanks
i have a printer C220 it gives double impression prints
l have done stanblization, i have reset the screw
but all have refused some help thanks
thanks alot the problem was solved
come again next time
Hi to all guys overthere i have astrange error code for on a c450 it is not inthe service mode the error is c 5370 i have tried to trouble resset but nothing and i dont know what is the problem...
l hve two error codes on a c220 konica minolta machine
c3201 and c5102 but when i change the fusing motor and the main motor
stil the erros come one after the other and when l change the PRCB...
l have tried all the solution given to me but things are no working out well
now l want to change the MFP but how much is the new MFPsome help
l have tried to all the steps told but no good result yet even when l change and download only the MFP and the reson why l was upgrading the firm wire was that the machine could bring an error code...
l have tried to all the steps told but no good result yet
the firm wire i load is of the version aoedoyo-fooo-gc7-59(00)
is it of the up to date firmwire pliz some help what should l do
thaks...
l have a c220 and it is not loading the firm ware for the MFP lt shows NG
it loads all the firm ware for all others like the ADF, scanner, PRCB
but for the MFP it shows NG.
and when l restart the...
scan on c203
l have laptop with windows 7 operating system
and lam configuring it to scan using pagescopebox operator l have run the setup of the drivers from the soft ware CD and l have...
yes it tells me to switch off but when l do it still no difference, the IP goes back to zero
Thanks 4 the reply but on the machine l dont see
two fuctions 1. Touch External Memory Function
2. Set Scan to External Memory to Enabled
what should i do any reply
and if...
DEAR ALL; i have a c250 but when i enter in the IP adress,subnet mask,default gateway the machine tells me to
switch it off and then on, and when i do that the IP adress goes back to zero.ive tried...
Dear all, l have a problem
could any one know the steps of how to scan to
the flash disk on the c220, becz apparantly l can only
print from the flash my MFP doesnot print using the net work...