I had one time the same problem and just cleanin optical and adjust adf fix it. I did not try adjustments in 08 or call Toshiba for support
Type: Posts; User: bobe
I had one time the same problem and just cleanin optical and adjust adf fix it. I did not try adjustments in 08 or call Toshiba for support
Hy
I have a Toshiba 5540 and all the copies from ADF and glass to are coming pink( red), internal prints are looking perfect. I format HDD and update firmware, clear flags, replaced CCD and...
did you figure out what was wrong?
Hy,
I'm dealing with this error code C11-90 on FS-527 (alignment motor or sensor). I looked on Konica manual and I didn't find anything how to remove the alignment unit. I tried but seems hard...
2 above and 1 shaft=3 screws
thanks. Is not because of charge unit. I know how to take it out, but now seems to be stuck inside. I removed developer unit, charge unit, all 3 screws on drum unit but stiil wont come out. Good news...
Hello,
I have a canon 6055 with copy quality issue (was charge unit) . I took out the drum unit clean it put it back but now is stuck . Was someone in the same situation. Thanks
Thank. I repaced the Relay Board and is working. Thanks
hello,
I need some assistance with this error code C1103 on FS-528. The copier is down and I already adjust the alignment plates, replaced sensor and motor (not yet the Relay Board and...
replace SSD , call Konica support , and do latest firmware update if the copier is rebooting
Hello,
I have an HP Designjet with overlaps image. I loaded the image in attachement. The printheads have been replaced but the image is still the same. Thanks
hello,
Sharp MX2600N, only color is working is yellow anything else is blank ( I don't have cyan, magenta and black ). Who has the same issue or have any idea please reply me. I thinking to...
Hello,
I need a CF card and adaptor for Konica Minolta to flash some copiers. Who knows the parts numbers and if I can order them from Konica. Thanks
hello,
I have this copier 1050e who gives me dog-eared on 2-sides in finisher Fs503 when I print in main tray -one side is OK. I have also PB501, SD501 in configuration. Thanks
Do again the color calibration, setup the time. I had the same problem. 1st time because of the time setting and 2nd time color calibration
Hy,
I have this bizhub C451 and is jamming in secondary transfer unit J3001. I replaced all unit(second transfer unit), clean everything form paper tray rolles and sensors to fuser. The paper...
Thanks
i have replaced the vertical conveyance and is working.
thanks
Hello,
I have this error code C0094 for a BizhubC35. I red the troubleshooting and I have replaced the transfer belt already, but the Vertical Conveyance assembly is coming in 2 weeks. The...
Hello,
There is an option to send a fax to folder or to BOX. I setup scan to SMB but I don't have Box option. Customer wants all the faxes to be saved on HDD. Who done it maybe can help me This...
hello,
Who knows the web site support for Sharp and how do I have to login?
thanks
Is just my opinion.
1. Ricoh why because you can fix every fuser, service mode are friendly , not because use i don't like the development unit MP3500. Board are great no problems.
2 Konica why...
Worst copier ever made. C2403 because you replace the toner bottle is a ..... The finishers are also .......
It's all I have found on konica support. Nothing more. I have never done VoIP before so I just wanna ask a tech who done it.
Thanks
Hy
I have a new konica C745 and I wanna know what do I have to setup for VoIP. This is the same setting for all Fax boards.
VoIP is still not supported offically by Konica Minolta, but may...