Hi All,
I have a few CM3530 with Safecom installed. The problem is after some time the Safecom solution will start to give many kinds of problems. This will usually force me to change a new HDD to...
Type: Posts; User: aidil rashidi
Hi All,
I have a few CM3530 with Safecom installed. The problem is after some time the Safecom solution will start to give many kinds of problems. This will usually force me to change a new HDD to...
Hi All,
Need to ask you all whether has face this problem or not. My CM6040 now cannot show the user name of print jobs when customer print from iMac OS 10.6. Below is the panel screenshot. Machine...
Hi All,
Did any of you ever change the CM6040 fuser roller and pressure roller? Can we buy the roller alone and not the entire kit?
Thanks
hi...
i'm based in KL also. never use Cartadis. currently we are using Safecom for total print management which also include pay system.
can you explain where the paper jam at?
Hi All,
I'm new with Canon copiers and trying to get the most out my Canon machines. I read about this e-Maintenance thing in the web and a bit confuse on how it works. I understand that it is a...
I am quite new in the copier and printer service industry. Give or take 9 years. The first few years I always have the same question from most of my customer...how much is your pay...is a copier tch...
:D hahahahahaha......
mommy i want my milk...i want my lunch....i want my dinner
this is not a DADDY DayCare...
put in some effort/contribution first and others will GLADLY help you
Hi...try checking the display setting of memory media is ON or OFF.
REG/SETTING > PREFERENCES>DISPLAY SETTING > STORE LOCATION DISPLAY SETTING
I face this same problem, machine can detect my...
Hi all..can anybody tell me the toner yield for xerox 286?
hi all...can anybody tell me thw tiner yield for GP335?
never heard of the claw flipping on itself but i do face belt ripping due to the paper used by customer that has some kind of glue that cause the claw touching the belt and ripping it.
I'm not an expert in page scope but i have tried it at my customer office. it will recognized any brand of printers and MFPs that support SNMP protocol. at it will usually works fine as long as you...
Check also BOTH of the heater lamp for sign of broken filament or discoloration. this usually meant faulty lamp.
Hi again,
I got 2 machine that suddenly gave out this error C-D282.
According to the service book, either one of the OACB(Main contrl board),PRCB (print control board) or the SDB(scanner drive...
try checking all the actuator at the paper detect assy...(the black plastic actuator beside the paper supply roller)..one more thing is the connector at the back side of tray 3 properly connected to...
try going into the administrator setting...network setting..ip setting..and check all of the available port...is the port you are using enabled or not?
one other way of going around this is to...
any idea where can i get one?:D
btw i'm in malaysia....
Work:
hitachi 16mb
pqi 128mb
fail:
transcend 256mb
i aggree with scott...it seem no toner is replenish in your dev tank...try checking all gears at the toner suplly system..it happens to me once a gear there was broken...gud luck
currently i am using pses ent suite which include net care as a plugin at my office. the software is monitoring 25 mfp and it works fine. after setting the smtp server address in the pses software,...
try checking the two step front door swicth near the analog meter
i use ver 2.5.5 and it works fine. it only give problem if you use a high speed CF (e.g 80x and above) for fw upgrade.below are the supported models:
bizhub C250/C252/C300/C350/C351/C352/C450...
1. Release version and download file name
The newly released program version and download file name are as follows.
[Release version]
<C250 MFP controller firmware>
Model
yes this machine is in a domain..currently i have 20 units of machine in this one customer place.each machine have about 100 users registered in the SMB address book..the problem is everytime i...