hI,
Good afternoon, just want to ask some help to anybody out there regarding my problem on how to change the paper size on my machine Minolta CS PRO ep2010. I want to change the upper cassette to...
Type: Posts; User: legaspiclg
hI,
Good afternoon, just want to ask some help to anybody out there regarding my problem on how to change the paper size on my machine Minolta CS PRO ep2010. I want to change the upper cassette to...
Hi Hermann,
Thank you very much.
Cesar Legaspi
Hi Hermann,
Thank you very much for your wonderful advice on my problem, sorry for being pain in the neck, but could you please give me the pictures or photos of the said area to be adjusted as i...
hI,
Hello everybody, i have a Canon IRC6870 who has a frequent problem with its UPPER FUSING ROLLER & LOWER FUSING ROLLER, IT IS the 4th time now with the span of 9 months that i've replaced the...
Hi Everybody,
I have a Canon IRC6870 which was displaying error codes E0748-4000 and alternately E0747-000.
Please help.
Cesar
Hi,
Good day, i have a Canon ir3100cn, i have a problem on this, when i turn on the machine it will initialized, but it was indicating the front door is open, and after i open and closed the front...
hI,
I have a Konica 7145, that keeps jamming on the Upper Fixing Roller, i tried to replace my other 2 used Fixing unit but still the same problem occurs. Is there any adjustments on the machine?...
Sir Teckat,
Again thank you very much for your sound advice. I will do what you said, will inform you later what will happen.
Regards
Hi Sir,
Grreetings,I just read about your ad regarding PhotocopierTechnician to be assign here in Worcester/Warwickshire area, fortunately, i am from Worcester, just wondering if i am qualified to...
Hi Sir,
Is this in relation for the frequent error f0020-00ff?
Thank you
Thank you very much sir, i will try to do that later>
More Power.
hI,
Good day again, just wonder if somebody could help about this message "CHECK THE DRUM PHASE" after i enter the *28*?
Thank you.
Hi,
Thank you very much for your kind reply, i did already what you said but the error was still the same, to be able to remove the error is to replace the system control board. can i used the motor...
Hi Everybody,
Good day, I have a Konica 7145, which was indicating error 51-4, i already replace it with my 2 spare SYSTEM CONTROL BOARD UNIT, i already replaced the third unit from my other...
hI EVERYBODY,
Good day, I have my problem with my RISOGRAPH TR1510. After i scanned the document, there is no print, when i check the Master, there was no image on it.
Please help.
Legaspiclg
Hi,
Good day, just want to ask again, about my machine, i have a lot of TONER for CANON NP6050, Can i use this Toner for my Canon IR6870?
Thank you.
legaspiclg
Hi Sir Teckat,
Good day, I managed to put the machine into use shall i say, thank you very much for the help and a sound advice, the problem is one of the RAM has a problem, i replaced it and the...
Hi Sir,
Good day, thank you very much for your help. I will do it and i will let you know the result.
Regards.
Hi Sir,
Thank you very much for the help. I was able to buy that manual from them
Thank you very much and more power.
Regards.
Cesar
Hi,
Good day, I have a canon Ir6870Ci the display not booting up. If i tried to power up the machine on the display there is a bar but it is not moving, but the machine is running, i can see that...
hI,
Good day, just want to ask where i can buy PARTS MANUAL for KONICA 7145 coz i want to buy GEARS for this machines?
Thank you.
Hi Sir,
Is this the sensor beneath the 2 registration rollers which is located on the side of the machine? or at the back of the machine? What will i do then if it is not indicating jamming when i'm...
hI,
Good day, just want some help, i have a konica 7145 that is always jammed on the registration rollers, and observe that the clutch was not turning, already replace similar clutch from the other...
Hi, Sir, the code appearing now is E05, i think the web roller is done, i resettted it 2 times already just to buy time waiting for the web roller to arrive, now i can do the simulation on the panel...
Hi sIR,
Thank you very much for your sound advice, but the problem is where can i buy those part, i know that you're from UK as well, i am from Worcester. Please let me know.
Many thanks.
Cesar