Thanks Big Papa. I will check out the clutches and the guide mylar and see if those are the problems.
Type: Posts; User: RichGK0215
Thanks Big Papa. I will check out the clutches and the guide mylar and see if those are the problems.
I can print single-sided copies just fine, however, when I try and print double-sided documents, the Bizhub C351 will print the first side, but when it tries to pull the paper back through to print...
Thanks. It messes up when I am printing, not scanning. And its only when I print double-sided. I print single sided documents just fine. When printing the double-sided document, it will spit out...
Can you also email me a list of the error messages? I would greatly appreciate it.
Thanks for all the info, but I have NO CLUE what or where any of that is. I will check it out though and if I can't handle it, I will call a tech out to fix it.
I try printing and I get a message displayed that says "Machine Status S-1" and the paper constantly gets stuck. Does anyone have an idea as to what this machine status means?
I actually figured it out. I just unplugged and plugged in the finisher to the copier and it went right away. Don't know why I didn't try that before. Thanks for your help.
I recently moved my Konica Minolta Bizhub C351 and as soon as I plugged it up in its new location and turned it on, I received an error message saying there was a paper jam. "Remove misfed paper at...
I have a similar problem. When I print something with a lot of Blue, such as a solid blue background, it prints as purple, or with purple streaks in the blue. I have tried everything that I "know"...
How would I go about removing the existing driver? I found the PCL 5 print driver on HP website and know how to download that. I just want to make sure I completely remove the PCL 6.
I keep getting this same error. PCL XL error - MissingData. HP Color Laserjet 5500dn. Can anyone help with how to fix this. When I send a print job, it will not print anything except this error...
OK, thanks. I am going to take it out and re-install it and see if that works. THANKS AGAIN!!!
OK, thank you. I just replaced the fuser yesterday and it worked for about 30 minutes while we printed and then it stopped. Maybe its a bad connection or the fuser is bad. Any ideas on that?
Does anyone know what Error C-3452 means on a KM Bizhub C351? I am checking everything right now as we speak, but wanted to get any help that I can. I greatly appreciate it.
Nevermind, I got it. Just a simple opening and closing of the front door did the trick. AGAIN,
U R THE MAN!!!! I appreciate your help, it took me about 30 seconds to figure out. Now its talkin about a malfunction detected, call you tech rep. The unit is in correctly and everything is back...
I need to replace my Transfer Belt Unit on my KM Bizhub C351. Apparently, it is suppose to be easy to do, I just can't figure it out. Does anyone know how and can give me instructions?