Search:

Did you try to print in mono. Every time I ran in to this (I've run into it on Altalink C80xx and Altalink C81xx ) mono still printed fine, Postscript printed fine and but colour PCL6 completely...

I would be tempted to give them a PaperCut Pocket trial if they only care about secure printing. Yes there will need to be a Mac/PC on the same network as the printer at the time of release but one...

If it is really consistently some users users and not others. e.g. it isn't that different users use different copiers. Or different user scan using different scan actions, or different scanning...

From the description of the fault, I am assuming you are using the SmartSDK version of the PaperCut embedded.

Blunt answer, follow the instructions to install PaperCut from the embedded manual...

Known issue CDSS-2566 Known issues with PaperCut MF, NG, Hive, Pocket and Mobility Print | PaperCut

Fiddle with the device TLS settings as described in the link above and you should be good.

Thanks blackcat,

So no gotchas to getting a second hand print and scan option? They don't get paired to the machines at install?

I hear you about the age of the machine; but if I if I get him...

So, I know Kyo;Sharp;Canon;Ricoh;HP; Lexmark inside out and my mate calls me out of the blue with a TOSH question!

So he wants so scan to his PC and network print. Looking at the spec sheet it...

You have both telnet and http down.
First turn on telnet
SP 5828-090 set to 1

then telnet onto the machine
(If you have never done this before download PuTTY PuTTY: a free SSH and Telnet...

I almost certainly have access to service manuals from HP if I could remeber what site I should be going to. In HP terms I in EMEA (UK) if that makes a difference.

Which of the many HP sites...

From the engine firmware notes:
1.22:01

Spec changes:

Firmware modification (Engine and System/Copy) so that the power line
(24V) is shut down when detecting the layer short-circuit and SC...

You can turn on "Edge to Edge" Printing in the driver options. It isn't perfect you get a white margin on the leading edge but it is an option. I've attached a A4 sheet printed "edge to edge" with a...

Thank you Blackcat your answers are always quick and concise I really appreciate it.

Do current Kyocera MFPs have any device cloning like Sharp and Ricoh do. Or is there a software tool I can use for the configuration of large numbers of devices like HPs WJA?

I can't think of...

Shadow1
Lagonda
Slimslib

The Y stands for yellow...

It is almost as if they wrote it with the sole purpose of making HP Web Jet Admin seem usable.

I'll never understand how companies who can make solid software for their hardware can't write ...

Well someone in the Ricoh factory thought it was funny.
(Look at the label.)

Thanks for all the replies. I'm going from multiple models mp1600/2000/161 3300s etc. To mostly mpc305/3503 and mp2001.

Thanks for the conformation that passwords for SMB do make the transfer.
...

Hello everyone, does anyone know if I use the WIM address book backup and restore to from one machine to another if the passwords for scan to folder destinations get transferred?

And while I'm...

Yes, read the notes for the PCL firmware updates and see if it sounds like your issues.

All HPs with multiple trays I've suggested both the two choices to the client already. They were previously doing the second and don't want to do that any more but can't bring themselves to print the...

I have a client who would like to print a document once and have two copies printed on two different types of paper.

I can't help but feel there should be an easy way to set this up but I'm...

That fixed it. Thank you very much.

Morning,

I'm setting up a new machine and I keep getting the above error code. We don't do a lot of cannon gear. I couldn't find the error code in the service manual for the machine. But hunting...

Hello,

I don't normally get to see many Canon machines. I'm currently rolling out machines replacing some old Canon gear and I found this:

16541


Any one know what is purpose is and what...

Does anyone know of a way to get the firmware downgraded once someone :mad: has put the lasted firmware on I.E. The code signed one you can't downgrade from :mad:?

Thanks