Front cover open is generally a loss of the 24v rail. This can be due to thermostat in fuser blown. Check at power supply for 24 and 5v rails.
I have had a couple of faulty 555 power supplies as...
Type: Posts; User: Austech
Front cover open is generally a loss of the 24v rail. This can be due to thermostat in fuser blown. Check at power supply for 24 and 5v rails.
I have had a couple of faulty 555 power supplies as...
If you are really concerned, ask for the HDD to be removed and given to you prior to it leaving you site. This is the only way to totally ensure you are in posession of your data.
We have had to do...
Yep, have a number of issues with current ver 2000. Have been promised 2053 just around the corner with 2050 already including a lot of fixes including control panel response.
Let me know how you go...
Favourite method.
This is as simple as it gets.
1: Utilise the copier file_share folder as the inpath. This eliminates the need for user names and passwords etc required for the copier to scan to a...
Hi,
There are many ways to achieve the end result you are after with Re-Rite.
I have to say, the method you are using is my least favourite and have only used it for its novelty value. Is there a...
Hi,
You have inherited an excellent machine.:o
You machine does however have an issue with the magenta EPU. The error is basically an auto toner sensor error, and generally indicates that the...
No better way to break a colour machine than to not use colour.
The machine will always do an IQC check once the fuser temp gets below a certain level or after a predetermined number of copies are...
Hi,
More likely an IH control board issue, possibly the cooling fan on the control board. This is a very old model...possibly time for an update?
Good Luck
A
Hi,
The reason the edge of the paper is damaged like that is that there is more separation than there is feed. IE, there is no grip between the upper and lower roller either because of lack of...
Hi,
I have had this problem a couple of times now and the fact that the paper is going in behind the transfer roller tells me it is likely your duplex unit frame is bent and pushing on the...