For 75 and 78 only toner chip solution Available.
Sent from my Moto G (5S) Plus using Tapatalk
Type: Posts; User: sureshraidu
For 75 and 78 only toner chip solution Available.
Sent from my Moto G (5S) Plus using Tapatalk
For 75 and 78 only toner chip solution Available.
Sent from my Moto G (5S) Plus using Tapatalk
There is an option in service mode under adjustment section, 'Paper Registration'.
Select it and follow instructions . Registration can be matched pin to pin.
Sent from my Moto G (5S) Plus using...
Try replacing duplex motor. I've solved same problem with duplex motor.
Sometime it was showing 733 too.
Sent from my Moto G (5S) Plus using Tapatalk
Run Registration setup in service mode
Sent from my Moto G (5S) Plus using Tapatalk
I have a solution for this +919766143007
Call me or WhatsApp.
Sent from my Moto G (5S) Plus using Tapatalk
Inside the Altboot folder,create a file named FORCED_UPGRADE.
Sent from my Moto G (5S) Plus using Tapatalk
For which model ??
I have solution for some models
Sent from my Moto G (5S) Plus using Tapatalk
Solution available.
+919766143007
Sent from my Moto G (5S) Plus using Tapatalk
This is spar vision.
Search xerox 5755 SPAR firmware.
You'll get this same version firmware.
Sent from my F5122 using Tapatalk
Try replacing memory RAM
Sent from my F5122 using Tapatalk
Try one more hdd.
80gb or 160 gb only Altboot is sufficient.
Sent from my F5122 using Tapatalk
Post a picture of that screen asking for code.
You can use it by login as administrator.
admin - 1111.
Or disable accounting from machine status- tools.
Sent from my F5122 using Tapatalk
#+login/out simultaneously
Passwd - 1934
Diagnostic routine
Copier routine
132 initialize
Select all and confirm one by one.
Closeout.
Sent from my F5122 using Tapatalk
Change NVM Battery
If not solved, replace NVM Ram.
And
Last option is main controller. (mother board)
Sent from my F5122 using Tapatalk
Copier routines
03 machine run control
System install phase, - 4
Dc install phase - 4
Exit.
09766143007. For any other queries.
Sent from my F5122 using Tapatalk
We have already replaced drum and developer.
...
For all models???
Sent from my F5122 using Tapatalk
xerox service plan change code available for all machines if anybody need please reach me on. +919766143007
Sent from my F5122 using Tapatalk
Dear dutchman !!!
U r resetting a wrong code.
You must reset the nvm location 744-350 to *0*.
AND reatart the machine !
I am using bafo bf810
Working fine .
But if any usb to serial failed to connect to ur 3535,you have to change some settings in device manager-ports-serial port-advanced. There are two options one...
I think you have given extra pressure at the lower right cover using double sided tape or a screw,
if still u have problem, u can call me 09766143007.
https://db.tt/ZzKxMF74
https://db.tt/ZzKxMF74
Free PWS TOOL DOWNLOAD