Search:

the prcb was fix one month ago

what is PRCB

what is PRCB

c6500

Keep getting error C-2813, even when I change the drums, sensors, also cleaned all sensors, but keep getting the same error code even when I change those parts, code remains. Could it be I need to...

i just replaced the fuser unit and got this code c2451 then got code c3912 can you help

just got a code c3912 also

just got this code C2451

every time i run a job it will jump out of the Qual in workstation is there a setting in the copier to fix this

replaced fusing unit told this would solve the issue but still after normal warm up time still says machine warming up how can i resolve this

looking for a fuser asy unit a c5501

can someone help me the unit just stays on and says WARMING UP it will last for ever i tune off the unit wait back on and will happen again

now getting code 4520 check belt and sensor now what

getting a very sharp cyan line on all prints i need to fix it ASAP to get this job done

what can i clean the transfer belt with on a c3220

getting a sharp cyan line on prints in the middle can not find were it is i need help ASAP to get this job done

got a error code on my c3220 error was 02-0181 what is this for comes up all the time

is there a piece of felt inside the temp sensor if so please let me know

is there so pose to be something inside it all i see is the temp inside there is a set screw in front of it did something come off

got error code c3501 does that mean i have to change the Temperature sensor #1 every time i turn on unit even after it cool down still got error this is on a c5501

image look like they are out of registration almost 3D looking can some one help

after runing 3/4 prints then get cyan over prints then reboot unit then ok what happen

Thank you i will try it

its a C-5501 can you send a bit more info on gear is it the one nest to the sensor about 1" dir.

thanks

K/M C-5501