Search:

check ITB Driver PCB connection to PS202, M101 or replace ITB Driver PCB

Check hopper C above developer

#865







Cause The functions related to job execution are restricted.

Check Department ID setting. Do it turn ON?
If setting <Allow Printer Jobs with Unknown IDs> was OFF. You can't print if you don't have ID

[QUOTE=zeckryyu;2244701]May i know,does canon have reading counter online to email...i knew there are,such as xerox,konica,ricoh...but i never knew about canon setup....i would like to do it for my...

The developer unit is not rotating which is caused by the developer unit coupling breaking. The error code will vary according to the color of the affected developer unit. E00027-0300 = Cyan...

E280-002 :Check cable
E732-0023: Check maincontroller
As you said, already replaced main controller 1 & 2 , So i think problem are Reader PCB or DADF PCB

Very easy if you have Service Manual

Why image on Belt so dirty and stain don't have on right edge, make clear this. This problem usually issued by tranfer roller. If it happend on all color, maybe tranfer roller on right door, or check...

Alway use latest FW. Freeze machine usually caused by HDD or RAM

Also repalce H.V.T PCB if all methods can't solve

Have you checked hopper? Do it has toner? Pour toner inside hopper out then toner bottle must be turn. Check If bottle toner turn but no toner fill in hopper or not?

With Black Copier,use only black toner. With Color copier, black images were created by mixing C,M,Y toner.

Try going to driver- Printing Preferent- Quality -..

This code doesn't relate to developer. Toner bottle is turned by motor, this motor be locked and can't turn as normal than code will appear.

If replace with good Fixing assembly still jam then problem will be at Registration Sensor or Flag of registration sensor

Both of them, you can see contents of document.

Paper pass throught Fixing delay

Check any worn at leading edge paper
Maybe 2 reason: pressure between Pressure Roller and Fixing Film not good, or Flag of Fixing outlet sensor got sticky then...

Try Clear -All Items, Reload Firmware. If can't solve, MainController got faulty surely

-Check connector from HTV to Developing Unit
-Check coupling gear inside Developing Unit

Printing Job Hold Documents :Temporary Store Print jobs. Will be auto delete follow setting <Time Until Hold Job Auto Delete>. This function use for sample print or security (no one see content of...

Most of case is Ram, Maincontroller or cable to Maincontroller. If not try to replace Power Supply Unit

Just unplug ADF cable.
When an error is detected, the functions related to the detected error are limited to make use of the other functions.
When an error code related to DADF is detected, the...

Try another Firmware. If you don't have, contact Canon Dealer

If error E355 that mean original mainboard fault. Replace correct new maincontroller will solve it. If you want to solve e355, replace main pcb with counter,id pcb sametime or event dc controller

I thinks you should replace whole of right door, not only transfer roller.