Search:

Type: Posts; User: theengel

Page 1 of 20 1 2 3 4

Search: Search took 0.08 seconds.

  1. Replies
    3
    Views
    1,618

    Re: HP LaserJet Enterprise M608n Grinding noise

    having the same problem on a m608. ive replaced the fuser. did you ever figure it out?
  2. Replies
    3
    Views
    619

    Re: CP3505 right slide lock / lever

    You need a new ITB.
  3. Replies
    11
    Views
    1,972

    Re: Designjet T2300mfp scanning problem

    I had a customer with exactly these problems.

    Couldn't scan large sheet... or sometimes it would scan a few inches, then stop, as if it scanned the whole thing... And what it did scan, half of it...
  4. Re: Designjet T1100 87:11 Fail nScan Axis Length: 1070368. Too SHORT

    I would say that's the solution, except that the Scan Axis calibration is a PWM check and calibrates the intensity and placement of the line sensor,,, which I don't think is used until you have paper...
  5. Re: Designjet T1100 87:11 Fail nScan Axis Length: 1070368. Too SHORT

    Brought a new encoder, this time the rightn p#, and a new set of trailing cables. Replaced both, and nothing has changed...

    One thing: during the scan axis text, towards the beginning, it says...
  6. Re: Designjet T1100 87:11 Fail nScan Axis Length: 1070368. Too SHORT

    I don't think so. During the scan axis test, it says something like "checking the scan axis length." the carriage doesn't move. Then it says something like "44""

    Anyway, I've got another...
  7. Re: Designjet T1100 87:11 Fail nScan Axis Length: 1070368. Too SHORT

    The different part numbers do not necessarily indicate different parts. Like I said, I only did it to eliminate it as a problem. The original one looks perfect. When I line the two up, they look...
  8. Re: Designjet T1100 87:11 Fail nScan Axis Length: 1070368. Too SHORT

    I'll probably do that, but the old one has all the same problems as the Z2100 one. I hate to put money into it that won't produce a solution. But maybe I haven't eliminated it until it gets a new...
  9. Re: Designjet T1100 87:11 Fail nScan Axis Length: 1070368. Too SHORT

    I wonder if there's a weak spot in the cables. I saw the Z2100 and T1100 have the same trailing cables... maybe I'll bring that with me to see if it's poor communication between the encoder sensor...
  10. Re: Designjet T1100 87:11 Fail nScan Axis Length: 1070368. Too SHORT

    The original encoder strip looked perfect. I only replaced it to eliminate it... I stole it off a Z2100 from the shop.

    You're thinking the carriage is running into the cutter causing it not to be...
  11. Designjet T1100 87:11 Fail nScan Axis Length: 1070368. Too SHORT

    I had a customer who got 87 jams every time they loaded paper. If they loaded the paper and then turned on the printer, there would be some sort of 'paper loaded incorrectly' error.

    I replaced...
  12. Replies
    2
    Views
    735

    Re: M4555 MFP Hard Drive

    I forgot to follow up on this.

    I ended up replacing the formatter along with the HDD, using a normal 250gb SSD purchased on Amazon instead of an HP SSD.

    I replaced just the formatter first, got...
  13. Replies
    2
    Views
    735

    M4555 MFP Hard Drive

    I'm installing a new formatter for a Laserjet M4555 MFP. I was thinking In would also replace the hard drive. Does anyone know (the manual doesn't make it clear), can I just use any HD? Can I put...
  14. Replies
    1
    Views
    695

    Precision Roller White Towles

    Have any of you bought them in the past? I was in love with them. You couldn't tear them with all your strength and they'd hold up to any amount of scrubbing.

    But the ones I bought last month...
  15. Replies
    6
    Views
    688

    Re: Designjet T730 SV vs AmpXL

    I ordered the one from HP. Installed, and it didn't help my problem. Grrr... these t730's are job security.

    This problem started over a month ago with a leaky printhead and the paper read error....
  16. Replies
    6
    Views
    688

    Designjet T730 SV vs AmpXL

    I'm trying to find a carriage assembly, as shown in the parts book, which would include the trailing cables, sensor, and a couple other parts (P# F9A30-67061). I ordered one of these not long ago...
  17. Re: DJ T830 needs update after replacing main PCA

    I replaced the OOP sensor and this machine finally works.
  18. Re: DJ T830 needs update after replacing main PCA

    I've got all the cables at the board inserted correctly. As for the rest of the machine... well, I never touched them so I couldn't know but I inspected and cleaned everything I could get my hands...
  19. Re: DJ T830 needs update after replacing main PCA

    Criminy--this call is never gonna end.

    I finally got a new board (none of the updates solved the problem). I installed it and went through entering the date. The system started up but then got...
  20. Re: DJ T830 needs update after replacing main PCA

    Not the first time. The screen said to insert USB drive, so that's what I did. After it uploaded everything and then returned to the same screen, then I did various things like start it with USB...
  21. Re: DJ T830 needs update after replacing main PCA

    i HAD 2 usb DRIVES. One with the two downloads, one with the latest firmware. Nothing happened with either of them. Then I realized they were both NTFS. I had an old usb in my pocket, so I asked...
  22. Replies
    8
    Views
    2,666

    Re: HP LaserJet 4700 | Any old firmware needed

    Dropbox - drive-download-20170726T213556Z-001.zip - Simplify your life
  23. Re: DJ T830 needs update after replacing main PCA

    Got them--thanks a heap. Here's the weird thing, your dropbox link was on page 2 of the thread, which I hadn't gotten to yet... I retried the old links and they're working fine in explorer. I'll...
  24. Re: DJ T830 needs update after replacing main PCA

    Are you sure this isn't something someone would need special permission for? I see pub in the url, but chrome comes back with:

    You don't have permission to access...
  25. Re: DJ T830 needs update after replacing main PCA

    I've tried internet explorer, file explorer, edge, and chrome--I also tried an ftp client. I'm simply unable to see anything, or get to, that link
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4