Replace the Duplex clutch.
To confirm it you can swap the clutch with other clutch (but not with registration clutch).
Type: Posts; User: ps/pcl
Replace the Duplex clutch.
To confirm it you can swap the clutch with other clutch (but not with registration clutch).
Jam code 0116 delay jam at ps30.changed entire new duplex assy. Only 1 or 2 paper comes out successfully then jams at duplex assy .every time paper strucks at same place. During jam removal paper...
Noise and jam in stack bypass in IR5055. THe problem is intermittent.
Sometimes Five paper feed normally ,If huge noise occurs Jam 0101 occurs ,Paper feeds inside just for 5mm.
Replaced Bypass...
hi check the internet settings.proxy ,dns .try ERDS comtest first to ensure internet connection avl for machine. upgrade the firmware to get the machine SSL supported.
Main COntroller Board failure
Go for IR3225/IR3235/3245
3225- 30000/month
3235-40000/MONTH
3245-50000/MONTH
I had similar problem in three machines,It was due to dev bias contacts.After adjusting It is working fine
CHANGE port from tcp/ip to LPR it works faster enough
Sorry It is E110-0002
when i switched on the mc for first time i got the the jam code 0CF1 as soon as opened right door assy and closed it .was E100-0002 error code.Restared the machin many time same symptom...
Try to do the following service mode
CS POSITION TEST
CS OUTPUT TEST (UNDER SCANNER TEST)
Hi i am getting this error in IRC2570i,i have changed ITB Assy,DC Controller,ITB MOTOR
Checked grounding in Regist roller & ITB earthing
but still intermittent error code(sometimes runs 1000...
check whether browsing range in the machine is in off or on .It is in ipaddress range settings under netwok settings
ir2016j is just a copier model,u can't upgrade it
whenever printing thru EXCEL 2007 thru any driver(pcl6,pcl5e,ps,UFR), to Mailbox,job goes fine to the mailbox,but excel restarts with an error.
specs:OS-win XP
office 2007
IRC3180i WITH PS
Compaq...
IR 2016 whenevr A4 is selcted for copying ,scanner goes to the full right and bangs,
A4R,LTR,LTRR,A3 ALL ARE FINE
only when u connect n/w board this problem is there,swapped ip board,n/w...
in all white areas of the image there is yellow background on the display
dear all
i m facing a problem yellow background only in scanned images not on copies.
both in twain and send to file.
hi can u tell me the source to download this ps driver 4.60
hi
thanks for the reply
actually problem was with duplex connector,small piece of paper in it.
hi
After last paper delivery,m/c shows "check all covers are closed",after that machine recovers after rebooting the machine.
This happens irrespective of no.of copies,checked all door...
Remove the jumper on the fax board AND switch on the machine.
it will pop a error .
never mind ,switch off again and put the jumper back and
switch the machine on and try faxing, it wll work out....
e110-002 intermittent error
REPLACED LASER UNIT,dc con,mn-controller
checked door switch also
sometimes jam code 0b00
intermittent e110-002 and e100-0001 ERROR appears
replaced laser unit,dc controller main controller
and also some paper jams with jam code 0b00.
some times it runs upto 1000 copies well
what is the system manager user name and password for RUI