Or just use this new adjustment jig.
62384
Type: Posts; User: Don N.
Or just use this new adjustment jig.
62384
Wox. Normally I'd agree with you but I had a tech that's r/b a few hundred of these. We fixed countless skews (that most ppl wouldnt notice unless they scan to a PC & scrutinized the 4 sides parallel...
Likely correct on the scan bed being leaned on. I think the slower machines do not have scanner bed frame support adjustment screws. The faster models (C458/C558/C658) have an added steel plate on...
Takes 10 min to make an OEM K to OEM YMC.
Maybe 30 min. to rebuild a used core with all new kit. About $70 savings for K and $190 savings for YMC.
Come on in, the water's fine!
TSBSERVICE & REGSIS,
We're trying KTN r/b kits for the i series drums. So far so good but that's just after initial install. Time will tell if they yield the same. They are only labelled for the...
Assuming a poor mixture of developer content in the toner. We remive the offending toner, vacuum out the hopper & replace with Ktn toner. Do a hopper fill & run about 20 halftones at full density...
We've never removed the ducts. Lazy, I guess? I just stick my vac gooseneck in from the front door and get what I can. Can't tell if it gets it all out or not. I always blow out the DV unit's top air...
If no warranty available, I'm agreeing with poor cylinder earth ground contact. Can you access with a spring hook through the shaft hole and adjust/toy with it & test? (You're already about to chunk...
Thanks for that.
Curious if you've seen the i series churn right through OCR-ing an 80 page pdf? Or several back to back? Duplexed?
When I get the new storage boards in for my locked up C250i &...
That's all we've been doing for years. OEM K to color as he says. Just use the DV spacers coming out of the old YMC drums i your new OEM K drums. There have been at least 2-3 versions. Some 1 piece....
So it's not a corrupt file/doc., not software program/app. If the driver test page does it.
Long ago we had trouble with di200/251/351 series print controllers. Simply using a laptop with...
http://www.copytechnet.com/forums/images/misc/quote_icon.png Originally Posted by copyman http://www.copytechnet.com/forums/images/buttons/viewpost-right.png
Nothing has changed being in this biz...
We added LK & mem for searchable PDF years ago for a law firm. Takes a long time to OCR doc's on the machine. Even swapped the HDD for an SSD trying for better speed. Just scan to folder & use Adobe...
SEE THIS BULLETIN FOR THE FIX:
Konica Minolta c458
These gears & shaft affect tray 2 & bypass- 45/55/65 8 series.
(Quoting srvctec)
If you don't want to spring for the whole paper feed assy,...
Thanks srvctec!
We saw a KM bulletin that says the C458 uses some black coating on that shaft that gets rubbed off & gunks up the 1-way bearing(s) in these gears. Will affect tray2 and/or the...
Regsis,
My bad. Never seen or heard of a 306i so I assumed it was like most every other current bizhub i series and/or he mistyped 360i vs306i or it was a foriegn model but same architecture. Sorry...
Hey Wox - Are you thinking storage board on my two units as well? (Pls see my previous comments, & Thanks) Also, any guess if the latest FW is causing it, or just the heavy flashing/rewrite activity...
We have two lease return refurbs C250i, C360i that locked up in shop after latest FW was installed. One is unbootable in any way. One locks up after short use. Suspect storage boards. Could use some...
Had a spat of bad luck with generic staples years ago. We provide lots of Swingline 3pk x 5,000 for FS534, FS536 to pretty heavy users. Not a problem lately. When we did have the problem, they were...
You said done. Did you use the KMBS PCL/PS driver instead of the Universal? Tried PCL vs PS? Everyone seems to have fixed this with good drivers, exclusive of the UPD.
If yes, what program or...
I second the notion that the slower lower hopper should work in a 45.
Toner side notes:
During supply shortages we provided TN324 (for 25/30/36 8 series) that come with chip to TN321 machines...
Have you checked the front end of the toner hopper? Pry the clip and remove the white cap and see if it's clogged. That causes c2557 LOW toner code. Remove the rubber seal inside the white cap....
That's a high toner concentration, not low. Bad toner every time we've seen it. Vacuum out the hopper. Really only a few good aftermarket toners. Unless you've vetted hundreds of bottles, just use...
""Your PM box is full ;)""
My box has been full for years. Never used it once. Can't reset it. I too emailed the webmaster a few times. Like Copyman says, this site may not have a webmaster. If...
Exactly what do you mean by KEY USB???
Seemed like you said earlier you tried multiple USB drives???
BTW, I have a C360i that won't load FW0020 from multiple USB's that work fine loading FW...