Hi. I have a c70hc that prints like a C7000, good color but no RGB high chroma output. I calibrated both the machine and ic-601 controller. I double checked toners and we are using the c70hc Toners....
Type: Posts; User: drodas78
Hi. I have a c70hc that prints like a C7000, good color but no RGB high chroma output. I calibrated both the machine and ic-601 controller. I double checked toners and we are using the c70hc Toners....
Could you tell me how to check this? It has to be in I/O mode? The 24V DC are coming to the motor all the time or only when you tell the bypass to move up?
I think is worth mention that I've...
Hi, I've changed lift motor but problem remains. I want to try your solutions but is not so clear to me what do I need to do. Could you upload some images with reference to your solution suggest...
Hi, where did you connected the mouse? In the machine or the fiery? If it was in the machine in which port? Thank you.
I think fixing unit is OK because the other 3 colors have no problem at all.
How can I check more into this? The white spots are only seen at higher density. Is there any adjustment to lower the AC bias?
Hi, I'm having the same problem with a new (1000 clicks) C70hc. Does anybody knows how to fix it?
Regards.
Do you have the motor part number?
Thank you.
Hi, I'm having the exact same problem. How did you fix it? Please let me know.
Thank you.
Hi,
Nothing is surrounding the spot. And yes, the spots are different every time. The machine is new, it has 400 clicks now.
Thank you.
Hi,
Drum is totally clean. I tough the same at first, I checked but there are no spots. Also the white spots aren't a pattern. And only appears if the area has high magenta coverage.
Problem is...
Hi. I have a new c70hc installed. I'm getting this white spots only in magenta, attached are a 11"x17" sample print and 2 letter size test prints at M=255. The controller is IC-601.
Any...
Thank you!
I just swapped the magenta and yellow drums and problem solved. I swapped both drums back and everything is OK now.
Take care.
Hi. I'm having same problem. Was you able to fix it? Can you tell me how to do it?
Please let me know. It will be highly appreciated.
Thank you.
Hi, I have to PM an OT-502 for 150K. I'm looking for part A043890700 Paper Exit Roller (1 pcs). My provider told me that there's no part with that number. Could someone give me the correct or updated...
Hi. Anybody has this error code before? Has any suggestions to trouble shoot it? The machine is at 379K and the 300K PM has not been done yet. Thank you.
Hi. I'm not sure how to test the I/O mode 20-8 with paper present. Do I need to insert a sheet of paper from the front of the Paper exit section while in I/O check mode? Thank you!
Hi Luther. My mistake I think.
I can clearly see the white gears in the picture. However I was looking in the explode views manual and I can only find the Fixing drive gear (A03U 8093 11) near the...
Hi. I always run face up. The white page you are looking in the picture was sent without image from the computer to test if the jamming has something to do with toner coverage but even this blank...
Thank you Luther.
I checked the parts you told me to change but all this parts are in the fusing unit. Yesterday I swapped fusing units between the two machines I have: C5501 and C6500 the C5501...
Please take a look to the new post:
http://www.copytechnet.com/forums/konica-minolta/81043-j-3201-c6500-pro.html
Thank you.
Daniel.
Hi everybody.
I'm in deeply need of help.
Long history short:
I have a C6500 PRO and last friday started jamming. The machine is 604K prints and FS-607 finisher attached. We also have a...
Hi.
I'm having jamming on FS-607.
When 11x17 or larger sizes are printed the feeding paper side starts to came out of the finisher but then it stops moving and the machine detects the jam....
Thank you for the advice, what would you do with the control panel and scanner?
Hi,
we are moving a C5501 machine to a new office that is about 4 miles away, I never transported any used machine before. Could you give me some advice for safety transport procedures and things...