Search:

Type: Posts; User: vinli

Search: Search took 0.01 seconds.

  1. Replies
    30
    Views
    6,206

    [Jamming] Re: Ricoh Aficio 2027 Jams at fuser

    drive gear sometimes cannot drive the fusing unit ,increase the copper tension plate against the fuser unit fuser located near drive gear,tension will be good if when u unscrew the fuser unit, u shd...
  2. Replies
    31
    Views
    4,178

    Re: which model is the best?

    use 2035 toner & developer,change hopper motor to 2035 hopper motor
  3. Thread: MPC4500 - SC549?

    by vinli
    Replies
    17
    Views
    20,287

    Re: MPC4500 - SC549?

    if smc shows the error comes out early morning,i will try to disable the auto shut off mode & let it on all the time to prevent the cold start ups in the morning,or might hv to update the firmware
  4. Re: Ricoh Aficio 3025 replace toner bottle/add toner message and screwed printing

    type 1027 pcu can only be rebuild once after running abt 70k prints by changing the 5 gears on the developing unit but 3025 pcu developing unit gears will be broken abt 80k prints & cannot be...
  5. Replies
    24
    Views
    3,233

    [Jamming] Re: Strange jamming at 3025

    open the lower right door below duplex unit & look out out for the black paper paper guide is it hook on the machine body & also the one before regi roller, shd look @smc report on jam location, shd...
  6. Replies
    8
    Views
    3,284

    [Misc] Re: door open in aficio 2045e

    can try on the laser data cable connection
  7. Replies
    31
    Views
    4,178

    Re: which model is the best?

    aficio3030 shb be good enough,not much issue printing @10k a month, mp4000/mp5000 is the best after rectifying their toner issue
  8. Replies
    24
    Views
    17,961

    [Jamming] Re: Jamming Code J014

    one of the solenoid @the interchange unit timing a bit slow to activate the pawl to guide the paper, can try to clean the solenoid or change it
  9. Replies
    21
    Views
    33,541

    [Error Code] Re: A mysterious SC 220 on MP4000

    maybe execute an engine clear will be able to solve the issue
  10. Replies
    4
    Views
    1,334

    Re: Ricoh mp 2550 sp how good are they

    need to minimize jams in 1st tray if not the gate pawl @ duplex will be broken after user open & close it abt 10 times,fragile & soft frame, size detection sensor behind tray tends to drop off &...
  11. Re: Ricoh 2075 .. Msg " Please wait.. " unable to photocopy...

    can try to check on sc history in sp mode 7403 first before printing the first copy & work on tat sc code
Results 1 to 11 of 11