There is new lower fuser roller part number - A50U740112
They changed the thickness of the roller at both ends.
Cheers
Type: Posts; User: kalindd
There is new lower fuser roller part number - A50U740112
They changed the thickness of the roller at both ends.
Cheers
I'm sorry but can't help you.
I have never used XPS driver.
You won't find all those issue if you use postscript driver.
Cheers
Download the Postscript one
ic601_c8000_pss_win_v10175_jefgis_sc_tc_kor.zip (8757 KB)
I don't know to be honest, just download the one for C8000.
Can you connect to your RIP with Job Centro?
If yes just choose -
File-Import and then import your job. The job should appear in "image
controller hold" if not or you get an error.
Then you...
I assume that you send your jobs via print driver.
On the print driver look for a tab "Workflow" from there you can choose a "Print mode" just choose Hold to main body and you'll get your job in the...
My bad Allan, I misunderstood you.
I haven't seen 1051's dev tank for about year and a half and I can't confirm how the mag should look like with developer brush on it.
But yes if the magnet...
To me the dev unit looks ok. Like Allan wrote that band is normal.
I don't think that drum pot. sensors are the same for 920 and 1051 (I'm sure that are not). Did you swap only the sensors?
...
From what I see, there might be few different problems.
Looking at the second picture I would tell that the charge is way too high or the bias is improper. Both of those things will cause issues ...
Is the line edge to edge?
To me it looks like you need to check the transfer belt cleaning blade.
Hi mate,
When I said reset the network settings I meant go into admin, controller NIC settings ( Controller NIC Setting Menu: Configuring the Network Information of the Controller) search for ...
Did you try to reset the network settings on your controller?
You are saying that you have checked the JSP port number, is this the setting that is on the machine side or you are confirming that...
You need a newer version of Job/Color centro.
Since you have G00-15, download and install the latest job/color centro 2.0.x
Turn off the banner print from user mode and restart the machine.
Your customer should turn on and then off every time he/she is using it. Also restart the machine after turning it on or off.
The...
As far as I know, you have 3 choices.
1. ISWtrns
2. USB
3. Internet
I have never used ISWtrns or Internet on C7000. In ISWtrns you can choose either USB or LPT port, don't see any ethernet...
J-3152 - Fusing loop sensor (PS64) is turned on in the idling condition.
Did you check the sensor?
You've swapped the ADU, but did you swap the fusing unit? This sensor is located inside the...
Well ..... static electricity....... vacuum cleaner ;) .... who knows.
In the past I have blown ICP on bizhub 500 and the machine was not even on.
I've blown ICP on bizhub 1200 a year ago...
C-2101: Charger cleaning motor operation time abnormality.
I don't get it why you have cleaned the transfer belt motor?
Often the cleaner motor can't move the charger cleaner member (as per SM)....
Interesting, I can't find C-4660 in the SM.
I would suggest you to look at the shutter mechanism, does it moves smoothly?
If you have tried everything else that can cause this. Like:
having a...
OK mate that's fine, but once again you are not helping.
Are the densities ok?
Try few more thing:
Check the connection of drawer connectors of process carriage.
Access I/O check mode 05-01...
You are not giving too much information.
These errors mean that there is not enough density on the belt. We are talking about the patches that are being placed between the images on the transfer...
Do you have any other color registration fault codes in the history?
If the problem is with the firmware try the so called recovery mode?
Get firmware G00-40
create folders C7000\I\I0\ in the usb drive
then copy in the last folder A1DU021_00I0_G00_4000.BIN
then...
Sounds good ;)
Cheers mate.
I'm sure next time you'll be much more careful :p
Looking at the SM it doesn't state anything about firmware mismatch.
It says :
When the sub power switch
(SW2) is ON, no response is
received from the printer control
board (PRCB) within the...