Printer only has 37000 total clicks, yes 37K. Will not go through color registration without popping code. Tryed new color registrations sensor assembly and reset to default but no help. Drums and...
Type: Posts; User: galen
Printer only has 37000 total clicks, yes 37K. Will not go through color registration without popping code. Tryed new color registrations sensor assembly and reset to default but no help. Drums and...
Have a HP CP1215 with error triangle flashing. Manual said it was a door open but when you open and shut either door machine cycles and knows door is shut and then goes into this error. Don't think...
The customer wants to save all of their incoming and outgoing faxes in two separate files on their server. I understand where you're coming from but my problem is how do you tell the copier which...
The customer wants to save all of their incoming and outgoing faxes in two separate files on their server. I understand where you're coming from but my problem is how do you tell the copier which...
I'm trying to set up the network fax on a 2050. I have loaded the drivers and the address editor. When I go to the address editor and do the search it will find the copier. But then I enter the...
The machine has about 900K and the problem is intermittent. Sometimes it will Z fold but go through to finisher without jamming,it might Z fold up like an accordion and stop or it may run 20 or 30...
Have a konica minolta bizhub pro 920 that gets an intermittent Z fold at the registration roller or no registration roller drive at all. M2 registration roller or relay roller. Need to know if...
Have a Magi color 2400w with error light solid. Customer said the error light was on but it was working until they put new black toner in it. Now it won't print at all. Not sure why they put new...
I have a Konica Minolta 6501 that pops up drum drive errors. Drums have been replaced and the manual shows each drum has its own motor. Anyone seen this?
Thanks I'll try some smaller wattage bulbs if they will let me.
I tried removing each of the bulbs one at a time and it still was to sensitive. Of course customer has had the machine located in the same place for two years and claims they have not changed bulbs...
I have a KM-4050 that doesn't sense the correct length of original. If you block some of the light from the ceiling it works just fine. I have replaced the sensor with new but still same problem....
I have a 6501 that give me am intermitent 2421 code. Manual say's yellow dev drive abnormality, TCR sensor, or PRCB. I have cleaned TCR sensor and another company just replaced the drum and transfer...
I have an account that is on there 2nd Brother 4100E in the last four years. The first machine started saying add toner even after new OEM cartridges were installed. Now the 2nd 4100E is doing the...
Thanks Rich, is the pin on the process unit? So does it align itself into a hole in the back frame? Do you have the part number for the modified coupler?
I have a Konica Minolta 6501 that another dealer put a entire new transfer unit in last week because of a broken shaft on a upper roller that drives the belt. Today I visited the machine for 3503...