Does anyone have a working FS-3140+ Low Voltage Power Supply they want to get rid of? I have one that I believe is making electrical noise. Thanks.
Type: Posts; User: Doug Money
Does anyone have a working FS-3140+ Low Voltage Power Supply they want to get rid of? I have one that I believe is making electrical noise. Thanks.
Hi, I need to replace the DF roller assembly and sep pad. I needed to verify the part numbers and see if there are any instructions on replacing these. Mostly work on Kyocera but customer has two...
What would cause a Kyocera machine to have hundreds of lines across a page when scanning or printing? The lines show on copies, scans, faxes(coming and going), internal prints, print jobs, etc. ...
I've only ever had it be the slit glass or the lens. I have had to use a fingernail or razor blade on the slit glass to get stuff that I couldn't really see. Good Luck.
Sharp AR-M237 Tray 2 makes the popping noise at the top of the lift and never quite makes it. Broken teeth on lift gear? I am trying to figure out from the parts manual which one it will be without...
Customer removed jam and now paper sits just past registration switch. Thinking they broke the registration switch. I can see the tip of the flag sticking through the hole, but it doesn't look as...
Thank You. I will remember to keep an eye out for that.
I haven't had this problem, but could you elaborate more on where the spring is so I can be sure to do this? Thanks.
Check separation clutch (torque limiter). It could be dragging causing the noise.
The machine went through an electrical storm. Not water damage. It internal prints and scans with the same problem. I have never seen both of those areas have the same problem. There was other...
We have a machine that was traded in that went through a storm and after the storm it prints horizontal lines approx. 1/8" apart all the way down the page. The image is readable but the lines are...
I have a 3140+ that started printing a whole page of horizontal bands across the page when printing or copying. It looks like an LSU or control board went but I haven't seen this before. The image...
I am looking for the three feed rollers and separation assembly for the Formax FD-320. I have run out of suppliers to call. Any ideas on who carries these? Thanks,
Doug
Thanks Dave, yes I remembered Submit. I have been caught by that before. I tried different computers with different browsers. No firewall. Every other setting works fine except one touch from the...
I just put out an M6526 that when you try to setup the one touch keys through the web interface, it goes through the motions but does not connect them to the listing in the address book. I am able...
I have the same problem and I can't find the Bulletin either. Do you have the bulletin number or can you send me a copy of the bulletin? dougmoney@gmail.com
Thanks.
Customer bought new computer and can't find driver for Canon D780 in Win 7. Is this now incompatible? Thanks.
What about using a class B address scheme? i.e. 192.168.1.XXX and 192.168.2.XXX and use the subnet mask of 255.255.0.0 on the printer? As long as the first two octets are the same, the two networks...
I see many of you have dealt with this already. The question is when figuring a contract for a color MFP that is say in a church that prints bulletins as well as other documents, how do figure the...
I have a customer who broke the release lever for the dv unit. I was hoping to find a junk unit that I could grab the lever from. This one only has 12000 prints on it. IF you have one let me know....
Hi, I am looking for the service manual for the Sharp MX-M503N copier. Thanks,
Doug
I have a customer that has a Savin 2522 that occasionally prints a perfect test pattern with 3/8" alternating black and white bands. The problem is it is supposed to be copying what is on the glass....
Customer tried to run legal, paper jammed. Now there is a noise and F040 code. Haven't seen it yet. Machine is a week or two old. Could they have bumped the scanner lock or paper lift problem? ...
I have a customer in a Citrix environment and they want a new machine. The IT guys are not sure they can make an FS-6525 run in Citrix. We think it will but can't get anything for sure. Has anyone...
I tried the Win 7 64 bit first and that was a no go. Has anybody actually done this configuration and have you made it work? MS says it can be done, but not so sure myself if it can yet.