Did you have sort enabled, and did you scan all the originals or give up once the device statred printing the first couple of pages?
I think you'll find with sort enabled the first set is printed...
Type: Posts; User: Choro1dal
Did you have sort enabled, and did you scan all the originals or give up once the device statred printing the first couple of pages?
I think you'll find with sort enabled the first set is printed...
The SP C262SFNw has a PR controller, not GW. This controller does not have the same level of functionality and does not not support @ Remote (Cumin) which is the embedded versipn that can be...
Fiery Screen displays Please wait intermittenly
I would suggest that you ensure the print queue installed on each client has been created as an IP printer using an LPR port. The port name should be...
You have missed out SOP screen service mode and recovery mode. :)
Hdmr and Slimslob are on the ball.
The SP Mode is 5860-022 and the admin email address has to match the login email address with Auto Specify Sender name enabled.
As your configuration is using...
Do any of the pages of gibberish contain the string ' get / http / 1.0 ' or similar?
If so, check that your customer's IT support are not conducting any penetration testing.
If not, the usual...
Set SP 5860-022 to on.
Are the Heap and Stack sizes correctly set? The values should be in the SDK (Safecom) manual. If not, set both to no more than 75% of the maximum value displayed on screen.
User Tools, Machine...
Enabling classification codes (optional) in combination with a customised print driver (pop-up for classification code) would be an option worth investigating.
Depending on the model(s) of MFDs, User code counters can be obtained from WebImageMonitor (WIM).
Access the MFD using a Web Browser, login as the administrator, then select Status/Information >...
Copier Tech is right.
Deselecting the 'PC Control' option within User Tools> System Settings>Admin Tools>User Authentication Management will prevent users from automatically adding User Codes to...
Try increasing the diprint timeout setting.
(If the print system's port monitor does not receive does not receive confirmation that the data has been received before the diprint connection...
Toner Munkeh is correct, the SP 3600SFdoes not support User Code authentication.
Full details of security features can be found in the Security manual for operators.
Stick with Slimsbob and KenB on this one.
In User Authentication Management there are several options for restricting/accounting for print usage.
If print authentication is enabled and the...
Login to the MFDs Web page as the administrator and navigate to 'Tray Parameters PCL'.
(Configuration > Printer > Tray Parameters PCL)
Enter the PCL Escape code value into the appropriate tray. ...
As a rule of thumb and depending on the application being used to open the PDF you may well have an option to 'Print as Image'. If so, select this and resubmit the job.
If the print job is...
If you don't wish to use User Code or Basic Authentication you can always RTFM and set up LDAP or Windows Authentication, either of these methods would not require driver customisation or the expense...
As you wish to continue using User Codes you have a couple of options available.
1. Use Print Driver Packager-NX (PDP-NX) to customise a supported print driver using a print configuration file....
SD cards supported up to 2GB
No size limit documneted on USB drives, though they must be formatted FAT or FAT 32 only. They cannot have any form of encryption or security insatlled and must plug...
Try,
User Tools, (login as administrator), System Settings, Admin Tools, Extended Security, Restrict Use of Destinations.
You're right....Unless someone has altered the tray configuration in User Tools.
If the paper size for a tray is specified as a pre-set size instead of 'Auto Size Detect' (i.e 'Letter') and then A4...
The SP C 431 DN comes with Enhanced Lock Print installed on the Java Card. Either remove the JAVA card if no addtional SDKs are being installed, or disable the ELP filter in the ELP web interface....
To achieve pop-ups for your scenario customise a Version 3.x (32/64) bit Ricoh Universal driver using Print driver Editor.
Version 4.x Universal driver can be customised with Driver packager NX,...
Try downloading a new driver and customising it using the Print Driver Editor so that Pop ups are enabled for User Codes. (Full Instuctions are included with the download.) This will force a window...
Have you set the MFD to apply the Letterhead stting for copier mode?
User Tools > System Settings > Copier / Document Server Features > Input / Output > Letterhead Setting = Yes.
This will then...