Yeah that's the one. I know they look different but that's what they told us use.
Type: Posts; User: Eresources
Yeah that's the one. I know they look different but that's what they told us use.
In Australia we've been told to use MC-8720 charge rollers in place of the MC-8705. Too early to tell but they seem to last longer.
They changed the foam/felt cleaning roller underneath for a...
Off the top of my head, things I'd look into:
SMB Version used.
Quick IP Filtering settings on the device.
Firmware Version 3.3 or 4.0?
Windows Updates on server?
Konica Bizhub C200. Work was going to junk it so i rescued it. Has come in handy for friends and family. Got a set of toners and image units for free so it'll never cost me anything. :)
Well as I expected, no errors since the finisher has been removed. Doh!!!!!!!
Maybe we've got a wiring fault under the hood where the finisher sits. Some pressure when the finisher is in makes a...
We recently had one shipped to us from another dealer and it was shipped laid down on the right hand door side of the machine, on a pallet. Apart from one broken panel and scratches on every other...
We've been working on a machine for a while now that is consistently throwing the service code each day. When it happens, the machine will throw a message about the internal finisher stapler not...
Double check the little Black hard plastic square "pads" that the scanner mirror assembly slides on the rails with. I've had them disintegrate and cause some odd scanned images. Admittedly this...
Here's some things we've seen so far:
1. Konica Australia issued modified paper length flags for the doc feeders. It appears they didn't have enough weight on the counter balance part of the...
Ideas:
1. Unplug the network cable. Had network speed setting issues causing controller to reboot.
2. Unplug/replace HDD. MML's sometimes had CDXXX service codes for theses.
3. Re seat memory as...
This happens when the right hand side transfer belt latch LOOKS like it went in okay. You can home the holder and screw it in and it feels like it latched okay, but it pushed the belt up on the...
Please let us know if it works as I think it does. I'm curious to see if works at all. :)
You can tell the copier in the 8 series to ignore the settings from the driver and just use the ones in the copier. I've not set it myself but I've seen the option in the web interface.
Here's...
My go to fix for this is do latest firmware then date and time and then U906.
Has cleared each time. I seems to have these issues around the time that daylight savings changes. Some machines...
Recently we've been seeing the registration roller bushings start to gum up and cause the paper timing to go out. On A3 it would be worse as it's running under pressure longer. You have to remove...
Check the rollers directly above the fuser unit. There's 4 of them in a row. The plastic rollers gather toner on them over time and can cause that noise. If it's them, you might also see...
I've had weird things like this happen due to Flash in the browsers. I usually try to use the http only. In the earlier series there was an option radio button to click on the first admin login...
I know we've had issues with windows 7 SMB. We do the following registry edits below to fix it. It might help, might not. :)
Scan to SMB on Windows 7 Registry Adjustment
Use this adjustment if...
SNMP will more than likely fix the issue. I've had this problem with HP switches mostly but there is some gear out there which is based on or has the same hardware on the inside as the HP, they also...
It's a real bugger of a one to find. It took me close to 2 hours the first time I saw this happen. In the last 4 years I've had it happen maybe half a dozen times. Still can't work out how they...
Have seen the little black plastic pieces that the scanner carriage runs on, break and cause the mirrors to lose focus and cause a wavy image on the page. There's 4 of them, one in each corner. ...
We had something similar to this. We found the G20-K9 version of the firmware to be the fault. We went back to E4 then to GD3-K9 to fix the problem if I remember correctly.
Try swapping in a known good Tray 1 feed assembly. Have had reg issues with that unit before. Also check the grey "Removal Guide Assy" for excessive wear.
Also check finisher exit where the paper usually sits for stapling. There's a black flap that is supposed to help hold the paper down a bit. I've had it flip the wrong way and it jams and makes a...
Re-read your service manual. You have to have it in a folder named a certain thing. This series is different from every other previous.