HI Guys,
I have a IRA c7055 that is jamming intermittently, jam is logged as an OCF1 jam in the machine log. There is no real information about this jam code in the manual, except that its a logic...
Type: Posts; User: tech01
HI Guys,
I have a IRA c7055 that is jamming intermittently, jam is logged as an OCF1 jam in the machine log. There is no real information about this jam code in the manual, except that its a logic...
Hi i have a problem with the colour registration on a ir2620, the problem started after i swapped the cyan and black lasers to diagnose a laser problem.
All was good until the laser units were put...
Hi KL568,
Think you could have got it with DAIS, didn't install drivers myself, will let IT contact know and post back.
Thanks
HI All,
This is not a machine problem as such but i thought i might get some input as to possible cause of problem.
I have a customer with a IRA c5030 they use Dept code/pin for colour...
Thanks teckat appreciate you feedback
Thanks for the reply i do appreciate your time, as i stated i do get that the dev is constantly being replenished but do question it 500k life.
You said that you replace starters with drum,...
Hi teckat thanks for your reply, i don't think i explained my question properly?
As i said i am new to Canon machines, previous techs have taken a hit and run approach to servicing these machines,...
I would also replace feed roller and feed clutch if machine keeps jamming.
Hi am new to the Canon, there are a few C1 machine that we look after, have a question about starter, how often should it be replaced, 500k is stated in the manual but i would assume that would be...
Hi All have just joined site, have just started with a Canon dealer after 20+ years on another brand, i am expecting to make good use of this site.
I all has anyone had a ir5055 tripping the wall circyuit breaker when the transport handle is engaged. Machine breaker does not trip.
HI all i am new to the canon machines (have worked 20+ on another brand), i have a IR5055 that is tripping the wall circuit breaker when the transport lever in locked, there is a micro switch that is...