408ci
Magenta is not showing at all, running the u89 color belt or on copies , prints
All the other colors and black and white are fine.
Replaced the magenta drum and dv. Laser. When I remove the...
Type: Posts; User: toddanderson
408ci
Magenta is not showing at all, running the u89 color belt or on copies , prints
All the other colors and black and white are fine.
Replaced the magenta drum and dv. Laser. When I remove the...
J6101 on 11x17.
It will jam from any cassette, or mp tray
I have also replaced the fuser, only about 50k copies o machine. I have seen the same issue on different machine. but most customers dont...
I have some AK-7110 Jamming only with 11x17 size paper . Letter size works fine
On a 5054ci. In one of the previous threads some are shimming the AK door adding more preasure I tried that and...
It would be easy to cheat on the test, just have one of your junior techs login and print screen every question, than lookup all the answers. Even if they randomize the question you still would be...
I was told five techs from the same dealership are in the semi finals, I think next week.
Did anyone take the Kyocera service award competition Test ? I took it , I got a 65% not a easy test.
My buddy who works for a dealer in California told me that, a dealer in Chicago
Has five...
From the service manual - maintenance section 4-1 page 353 ,
you need to unplug from the wall, not just turning it off for the counts to reset.
60457
Thank you for your post, very helpfull, please attached some pictures
Loosen the scanner belt, the scanner bounces off home when it goes to Dp mode in QA Ref. No. 2ND-0163 (K112)
Does the issue show going to the right exit ?
7054ci fiery 17
Very slow printing. New setup out of box
When printing the ps test page or just the configuration page takes like 60 sec or more
To print just a print driver test page takes far...
I have seen where the finisher is not level, sits twisted not aligned to the machine.
What I have seen is the transfer belt connector goes over the top of the machine side connector when you slide it in. belt rails common
Remove the connector out of the old transfer belt, and plug...
I have an account with having several f248 codes daily
on 4054ci I have updated the firmware and print drivers
just have a hard time tracking it down
doe seem like printing pdf from chrome has...
Was it changed to something different, A lot of dealer are changing it to something other, because of security reasons
did you vacuum the ducts on the machine inside frame, that the developing unit mates to
I have a 8353ci with a C6770 code at start up.
Replace everything from the service manual states
low voltage pwb, fuser, ih pwb, engine pwb, feed pwb, ih unit, updated firmware
still having code...
We installed the yellow separator tire from the Dp7110
This took care of our double sheet feeding issues, its a better tire than the gray one
We are finding the old sep tire works better for this double sheet issue, But you cant get the old style tire any more
58116
Has anyone been seeing double sheet feeding on these feeders
We have several in the field with the issue and its very random
Replaced the tires and TORQUE LIMITER FEED_303JX07401 many times
Not...
I have been seeing alot of 3 and 4 series with primary feed jams
J0513 , J0514 , J051x
Feed tires seem to have a short life.
Has anyone else been dealing with these primary feed jams ?
If I remember correct in netviewer device> advance> send data
I have not looked at prescribe in a long time, there maybe many things different with a current machine and prescribe.
but at least at one time on the configuration file for the macro was to set...
anyone working for Visual Edge it sounds like they are in a lot of financial trouble
I watch this guys videos end of day with ray, hes does several videos on Visual edge
The End Of The Day With...
Post some samples of the issue