check or replace the PCB board that connecting on print head (located on carriage unit), this model usually that's the problem. its burn that PCB connector...
Type: Posts; User: benerin
check or replace the PCB board that connecting on print head (located on carriage unit), this model usually that's the problem. its burn that PCB connector...
Good Day everyone, I need some info and help from all you guys.. I have customer they want to SSL to TLS?
is its possible to do that on our machine iRA C5255i? and if possible, what procedure I...
Change ITB unit assy. or transfer roller Black...
Hello Everyone....
My machine IRA 6055i its always showing an error E005-001. I replace fixing assy unit, drive driver pcb, relay pcb and 2 24volts support board (left & Right pcb).. still...
Thank you for your reply Bipc, the 4 toner cartridges are new, only the firmware I did not yet updated. so far as of now the customer did not call again after I clean the ITB unit, If they call I...
Hello everyone!!!
I Counter a problem on my printer that time to time showing a message of "Color Calibration Error". I clean all sensors but still showing..
somebody can help me this...
black drum are new?:) Check also ITB black transfer roller..
black drum are new?:)
FC8-5778-000 Hinge Right...
Hello Mr. Hermann,
I will check again on Monday that problem. I notice that the display unit, the left side of screen are darker than the right side, its mean uneven light distribution on total...
Hello!!
My IRAC 5051, the display LCD is now become dim, there is any more adjustment on it? brightness/contrast adjustment on front panel is already in full adjustment..
Thanks in advance...
In printing same problem??
hello sir,
Sorry sir, it's PS17 front door sensor, right down corner of front door, near double switch door, there is a photo sensor. that's the only one that I removed and then my machine...
hello,
Thank you very much on your interesting reply..
Only one that I notice, if i open the right door or front door there is no error occurs, the machine will go to initialize status and it...
Hello, everyone, I Encounter an Error Code E00227-001, I replace Image Reader power supply, Image Reader Cable.. but still same problem.
Anyone can give an idea on how to rectify this problem...
...
Thank you sir.. okey, will change the registration clutch and sensor... and I will give you a feedback .... thank you again sir....
Yes sir its responding on it. before, A4 size I change unto A4R I thought it's on the orientation, but same problem (paper jam 0107, PS13). I notice that every paper jam there is a middle fold on...
yes sir, I clean and blower the sensor and extra wrap on flag spring.. and I replaced already a new and original fixing assy.. but after few days same problem occurs... I really confused in this...
Hello everyone......... I have a problem on IR 4570, it's always paper jam (0107) on PS13... anyone can help me on this problem? Thanks in advance...
Thank you very much Mr. Teckat on your reply.. Sir, me I know, why this message is showing up?
Hello everyone!!! I have a problem on machine showing on screen "READING LOG IN PROCESS please wait". even after 4 hours still showing same display, I decided to update a firmware but still same...
try to print/copy any document, during printing/copying stop the machine and then check if the image on the drum surface have a white lines. If the image are full the problem coming from the paper...
Kindly Check the Developing Unit... on the drum surface already have line?
Thank you on your reply sir, I clean it already inside the machine / connectors of ITB. I will try to replace the ITB.. and I give you a feedback on these..
Thanks & Regards
Benerin
I have problem on my printer canon LBP 5960 Error Code E067-0102. I check in service manual mention that, "Primary Transfer ATVC error the current measured at 2 points are identical" the remedial...