Search:

Hi All, new to these machines after having used the DC250 series for a while. Can anyone help me out and tell me what needs swapping to get rid of these smudges?

Also one of my booklet makers will...

Thanks a million guys! All sorted thanks to you :)

Just a bump in case anyone has any ideas?

Thanks

It happens when printing as well. The blank page was a copy, the rest have all been prints.

Hi All,

I'm having a problem with yellow lines and lines of yellow desaturation on one side of my prints. Swapped the M and Y drums to see if that was the issue but nothing changed. The issue...

Thanks a lot everyone! Saved me a lot of potential headache...

Hi All,

Just hoping some of you with more experience can share a bit of knowledge with me.

I'm thinking of buying a 9303 I found a good deal on but have no experience with the machine. I...

Hi All,

My 7755 is waiting for a new IBT home sensor and while it's down I was planning to use a 3535 with internal Fiery I picked up as a backup machine but I can't get the damn thing to print. ...

Thanks a lot. In case anyone else in the future has this problem I had to remove the inverter to get at the Waste Toner Set sensor at the rear of the compartment. A quick blast with an air can...

Thanks. Could you please be a bit more specific about the 'flag sensor', I'm not sure what you mean.

Hi All,

My 7775 won't recognise the fact it's got a Waste Toner Container in it whether it's a brand new one or an old one. I'm assuming this means a dirty or faulty sensor? Could anyone point...

I'm very thankful for your help! Didn't think to go one step deeper and replace the whole assembly after doing the motor. Still learning. Thanks again, I really appreciate it.

Amazing, thanks so much!!!

Thanks again, I've started a new thread as I'm past the original error code in the title of this one, there are photos of all the error codes, etc. If you could have a look I'd appreciate it. ...

Ok, so I've been having problem after problem with my machine. Currently there
are no errors but prints are still coming out with no magenta, the magenta drum looks like i just threw a pile of...

Thanks a lot for your reply. I've not had any 389 codes, although I think I've had every other code. A bit ashamed to admit it but I'm not sure what you mean by MOB. Could you please elaborate for...

My 7775 stopped printing magenta and error code 342-321 came up. I think the gears in the dev unit were jammed so I swapped that and the drum motor out. The error code is now gone but prints still...

Hi All,

I'm currently running a 7775 and have been offered a 250 with pro finisher at a good price. Just wondering if the finisher will work on the 7775 as well?

Thanks :)

Ken

Now saying copying and printing not available but no current error code.

Thanks for the replies. There is no current error code. As far as the machine is concerned it's printing fine :/

No yellow on the IBT Belt when checked after a hard stop, so I'm guessing...

Hi All,

Got a 7775 that started displaying 'There is a problem with the xerographic system. Please call for assistance'. Swapped out the drums and toners one by one and after changing the Cyan...

What an absolute lifesaver!! Thank you so much! :)

Amazing, I've just emailed you :)

The machine is currently on 061.090.222.33302, but I don't have a copy of that so am downloading 061.090.220.19700. Not sure why Xerox don't put the latest version on their site?

Thank you very much, will try this now :)