Thank you sir. I will try this tomorrow when I get them back in front of the machine.
Type: Posts; User: doug
Thank you sir. I will try this tomorrow when I get them back in front of the machine.
Hi Guys!
I want to receive a confimation report when my email is sent...how do i set up a confirmation report?
Thanking all of you in advance,
Doug
Hi Guys!
A customer wants a fax board installed on a Canon IRA C2020 copier...does anyone have the install instuctions still!
Thanking al of you in advance!
Doug
Hi Guys!
Once again, here is the customer issue,
A stripe is occuring when printing from a program using "Canva"....
Otherwise, using word , it is perfectly fine.
Has anyone ever used or seen...
Hi guys!
Can a hard drive from one canon ira c5540i be replaced to another one and be up and running?
Thanking all of you in advance.
Thank you !
Thank you!
I ll check and this machine they wanted to keep when they upgraded 😂
Hi Guys!
I have an IR 400 that says “load paper” when it has paper.
It will feed paper through the by-pass though…
Any ideas?
Thanking all of you in advance,
Doug
Hi guys,
I have a library that has a large capacity tray that will make the lift up noise when paper is added, but will not lift tray up.
What may be wrong and how do I fix this for them?
Thanking...
Hi guys,
I have a customer that has a Canon Color ImageClass MF820cdn that has a message to replace the yellow drum unit.
After replacing the yellow drum unit, and following the on screen...
Good morning everyone,
How do I clear the email that keeps sending the status report to the previous service provider on a canon IRA C5540i?
The machine was transferred to a new customer and it is...
Hi Guys!
I have a doctor's office that faxes from a yellow original, that faxes solid black to the receiving end, as well as prints solid black on the tx with image for confirmation.
Any ideas?...
Cleaned laser glasses!
Thank you!
Doug
Hi Guys,
I have a canon IRA C5540i that was fixed by your recommendations for a no screen display, now when the machine comes ready, there is a code E000354-0002 code.
I have another machine...
Hi guys!
I have a Canon IRAC350 IF that I just replaced the drums and it’s still leaving a blank straight down the middle from either prints or copies from the glass… any ideas?
Thanking of you...
Hello Phil I reset error code but not count code….
I will try that tomorrow…Just to be clear there is a counter code for the ITB?
Hi guys I have a 20 to 25 with this code I know it has to do with ITB but I replaced it and same code… any ideas?Thanking of you in advance,
Doug
Hi guys
This is the continuing note from the previous post of The canon iRA C5440i with the blinking energy save button.
Are the Main controler and HDD the same as a 555Oi?
And where are they...
Hi guys,
i have a Canon IRA C5540i that only the sleep mode button is blinking...am i right with thinking it is the main controoler?
If so, how do I replace this?
Any input would be gratly...
Hi guys,
After replacing a new drum, there is a procedure in service mode that should be performed...can anyone walk me through this
Thanking all of you in advance.
Doug
Hi Guys!
I have a Canon IRA C2225 that will not feed from tray 1...Tray 2 and by-pass will feed and tray 1 lifts up - paper goes to feed and says jam (also has new feed wheels/rollers)
Any ideas?...
Hi Guys!
How do I clear print log on a Canon IRA C2225?
Went into admin. mode, but cannot find print log clear...customer loaded several print jobs and chose the wrong size paper.
Thanking all...
Thank you Phil for responding...I am having trouble uploading a photo of the issue, but I will try in the morning to post it.
Again,Thank you!
Doug
Hi Guys!
I have a canon IRA C555 that has shadows when scanning through the doc. feeder ONLY.
The print of the scan confirmation is clear...any thoughts?
Thanking all of you in advance.
Doug
Hello There!
I removed and reinstalled main PCB and still no results...do you have any other ideas?
Thanking you in advance,
Doug